front strut/spring issue???

[ColoMike01]

The top and bottom mounts arent lining up properly, if I install the top first the bottom is slighltly off and needs to be rotated less the a .25 inch. Is there an easy way to do this with having to disassemble? I dont want to just wedge it in there.....

Thanks, Mike...

 

[TJQ]

The top and bottom mounts arent lining up properly, if I install the top first the bottom is slighltly off and needs to be rotated less the a .25 inch. Is there an easy way to do this with having to disassemble? I dont want to just wedge it in there.....

Thanks, Mike...

Rent spring compressor from local auto parts. Once springs are compressed a little you can simple turn the shock without disassembly. I learned this since toytec sent mine to me misaligned.

 

[gm350reratliff]

With the top plate nuts installed, you should be able to just use a large screw driver, pry bar, etc. and turn the strut where you need.

 

[jimmied]

With the top plate nuts installed, you should be able to just use a large screw driver, pry bar, etc. and turn the strut where you need.

Exactly. Just turn that shit until it lines up.

 

[Brownfaux]

Exactly what I did yesterday with my toytec coil over.