FS/FT: 3rd gen Rear Lift Coils (2 sets LC 9 and LX450 ) $115 SHIPPED, Upland CA 91786

[scrap metal]

Located in Southern California (91761)

115 SHIPPED to Central US (One pair)
125 SHIPPED to East Coast (One pair)
Trade for shorter spring; ome 906 ome 890 LC 7 wraps


_________________________________________________________
First Up LC 9 wraps off of an FJ80 land cruiser


Also another note, the LIFT FAQ states these color codes should both be at 21"
"Height of spring/color code/wraps
21" Blue Pink White 9.25 wraps
21" Grey Orange White 9.25 wraps"
That doesnt make sense to me because that wouldn't level out the gas tank lean...

so I measured mine




GREY ORANGE WHITE 20 3/4"
BLUE PINK WHITE 21"
__________________________________________________________

Next LC 8 wraps SOLD FZJ80 LX450






__________________________________________________________

I want to trade for shorter springs. My wife wont be happy with a 4-5 inch lift as far as rear carseat access goes for our newborn in November.

 

[scrap metal]

Taken from lift faq for you convenience

]The FJ80 Landcruiser Spring
a cheap effective way to achieve a good amount of lift and flex is to install FRONT springs from a FJ80 (1991-1997) Landcruiser in the REAR of the 3rd gen. there are many different versions of these springs but that main way to identify them is to count how many wraps they have which generally will determine how much lift you will get. you can usually pick up a pair of these for under $100 at a junkyard or on a forum classified section.

7 wrap is about 3-3.5" of lift
8 is about 4"
9 is about 5"

Height of spring/color code/wraps
21" Blue Pink White 9.25 wraps
21" Grey Orange White 9.25 wraps
20.25" Blue Yellow White 8.75 wraps-one of these is a confirmed LX450
19.5" Green Yellow White 8.25 wraps-one of these is a confirmed LX450
19.5" Purple Green White 8 wraps
19.25" Double Purple Dark Blue White 8 wraps
19" Double Pink Light Blue White 7.5 wraps
18.5" Double Pink Grey White 7.5 wraps
18 7/8" Orange Orange White 7.75 wraps
you can also use the OME 851, which is a lift spring for the FJ80. that usually gives about 6 inches of lift.

Pros: Cheap, lots of lift, flexes really well.
Cons: Will sag under load.

 

[whataboutno]

Interested in the LX450 springs... PM sent

 

[scrap metal]

LX450 Coils SOLD

LC80 9 Wraps Still For Sale