Getting Rid of OME Shocks, Springs, Front lift

[5th4runner]

p
Poked around and noticed the rear springs are OME 891

The shocks are OME nitrocharger sport. Could not find the part number. Anybody know where it is stamped?

Front has 2+ inches of lift spacers installed supposedly to level the truck.

Ride is too stiff for my tastes and am wondering the easiest way to get back to factory specs.

Also looking to drop it back to factory height due to wind issues.

 

[dozerfrelich]

how much for the rear coils and shocks?!?!?!

 

[5th4runner]

how much for the rear coils and shocks?!?!?!

I'll probably try to get what factory coils and decent shocks will run. Apparently you will need the spacers too in front since the rear setup raises the back end.

 

[krenaud33]

I'll probably try to get what factory coils and decent shocks will run. Apparently you will need the spacers too in front since the rear setup raises the back end.

I still have my factory stuff. They have 265,000 miles on them, but I think they rode fine. Interested PM me.

 

[5th4runner]

OK still looking into this and hoping the OME's get a good home.

The springs are OME 891 but the initial question is where to look for the nitro shock model number? Could not find it, maybe between the wheel and shock or maybe they need to be fully extended?

Thanks for the interest.

 

[JBurt]

If I recall correctly the model number is stamped on the shock housing. Good luck with the sale. I know the OME is a stiff ride. My front OME shock is leaking pretty bad and I just ordered Bilstein 5100's to see if that helps with the ride quality.