Got rid of my clock for an outside temp gauge

Thank you for posting a very informative writeup. Straight to the point with nothing unnecessary.

The mod looks great, a temp gauge should have been stock on all models instead of just the Limited.

Looks great!!
 
Nice.. I was researching this last week but wasn't sure which one to order. Thanks for the writeup.

Add this next to my list. :cheers:

Oh and a side note to the wife thinking your tinkering is lame, in Montana its actually very nice to know what you are getting into when you drive into the mountains. I had an experience where the valley was 50 degrees different than my destination. Not a fun thing to find out when you step out of the truck : )
 
Last edited:
thanks

Very cool thanks for.posting. As soon as I figure out why my AFR gauge stopped working, I'll have to add this mod.
 
These meters will go up to 257 F. Once I get it installed I can post pics

ry%3D400
 
Last edited:
Did the dash bezel clip in this picture clip in easily? It's right against the clip, so it looks like it will get in the way. Got any side pics of the area on the thermometer housing that you cut out to get this to fit in here? I'm doing this soon and I'd like to get an idea of where to dremel.



66624d1340603517-got-rid-my-clock-outside-temp-gauge-img_0217.jpg
 
No pic but I only had to dremel a small amount off the clip. Maybe 1/8". Just trim a little then test fit. That's all I did.
 
These meters will go up to 257 F. Once I get it installed I can post pics

ry%3D400

I doubt it's wrong where the comment says it is. Above 99.9°F it can't display to 0.1°F. Then it displays at 1°F up to 257°F. What it says is correct. You only get 100°, not 100.0°. The same thing at -10.0° or below. It only can display three digits, or two digits plus a minus sign.

The heading is 'Resolution', not 'Range'.
 
Last edited:
I'll be tearing apart my dash this weekend, wish I had already ordered the temp sensor; maybe I can find one locally...
 
I think I would find this mod more attractive if I hadn't owned my 4Runner for 11 years already.

I am worried it would look "off" when I am driving the 4Runner.

I guess I am just used to the green clock. :plane:
 
Since voltmeters just came up in another thread, here is a slight edit to this thread. I now have a blue voltmeter instead of the thermometer. Same eBay vendor and same housing for the gauge. Works perfect for over a year and a half.
 

Attachments

  • IMG_2436.jpg
    IMG_2436.jpg
    133.6 KB · Views: 723
Thanks. I was just thinking about how I'd go about doing this in the 4Runner since I love the thermometer in our Civic.
Appreciate the writeup and links.
 

Members online

Forum statistics

Threads
278,316
Messages
3,554,124
Members
248,016
Latest member
Advally Service

Trending content

Back
Top