Grounding on Rago CB Mounts

[Charlievee]

Got it working moved the ground strap a few times and finally got it to work of the grounding post in the compartment the factory jack goes in


Sent from my iPhone using Tapatalk

What's your final reading?

 

[Schriner13]

What's your final reading?

Got 1.4- 1.5 across the whole band


Sent from my iPhone using Tapatalk

 

[Ditchdoctor]

I have found a solution to the high SWR issues. I had originally used 10g wire and a couple ring terminals ran from the mount to the frame. Ground was good according to multimeter but still high SWR. I purchased a grounding strap from auto zone for $5. Secured it to a bolt which is behind what I will circle (there’s 2 I used the bottom one). Have to remove taillight to get to it. SWR is now 1.1 on 1 and 1 on 40. Make sure to ground the powder coat off to make a good contact. Hopefully this helps somebody!