Help needed installing wet okoles in rear/ removing plastic

[Sputnik]

Hello guys.

Got my wet okoles in about a month ago, and finally found the time to install them.
Well, I got halfway done, and ran into a snag.
In order to install the rears, I need to remove the plastic lever on the sides of the seats that you use to move the back of the seat.
I do not know how to do that. I tried pulling on it, but I don't want to break anything.

Any help will he appreciated, I seen a few guys on here that bought these seatcovers, please help me out

Also, will any wet suit shampoo work as a cleaner?
I'm thinking of buying the Mcnett wet suit shampoo off amazon, I didn't get any shampoo from wet okole

 

[hstn_texas]

I didn't have to take anything off. Ahh. I don't have the third row.

 

[dognick]

The covers I got don't fit my headrests. I'm sending mine back with pics. The vendor is good about replacing or correcting pieces.

Nothing should have to come off of anything to install these seat covers.


---
I am here: http://maps.google.com/maps?ll=32.739797,-117.057456

 

[Sputnik]

Hmm, I'm talking about the middle row.., my rear headrests don't fit well either

For $540 I thought I wouldn't have to go through this

I didn't have to take anything off. Ahh. I don't have the third row.

The covers I got don't fit my headrests. I'm sending mine back with pics. The vendor is good about replacing or correcting pieces.

Nothing should have to come off of anything to install these seat covers.


---
I am here: Google Maps

 

[hstn_texas]

well my middle ones were fine

30 minutes of stretching and elbow greese, but they went on. The headrests were a pita.

The lever on the side had a hole for it to fit through. i just threaded it over it.