majmattmason
New member
It's bothered me since day one that the seatbelt chime was too aggressive when it turned on. I couldn't find instructions here on this forum, so here is the procedure. If you decide to sell your truck or want to reinstate the chime, just follow the same instructions set below.
INSTRUCTIONS:
Make sure the ODO/TRIP switch displays "ODO"
Turn the ignition switch "Off"
Turn the ignition switch "On"
Press ODO/TRIP switch immediately (within 6 seconds after turning the power switch on) and hold it down for 10 seconds or more
Continue holding the ODO/TRIP switch and fasten the seat belt
Check that the odometer displays either "b-on" or "b-off" (it will be "b-on")
Press the ODO/TRIP button to change the display to "b-off"
Turn the ignition switch off.
That should do it.
INSTRUCTIONS:
Make sure the ODO/TRIP switch displays "ODO"
Turn the ignition switch "Off"
Turn the ignition switch "On"
Press ODO/TRIP switch immediately (within 6 seconds after turning the power switch on) and hold it down for 10 seconds or more
Continue holding the ODO/TRIP switch and fasten the seat belt
Check that the odometer displays either "b-on" or "b-off" (it will be "b-on")
Press the ODO/TRIP button to change the display to "b-off"
Turn the ignition switch off.
That should do it.
Last edited: