Guys, I went to Autozone yesterday and found a $6.95 antenna that had several different combination studs and one was the right size and long enough for Mangowalk 3" or 5" antenna and T4R female receiver. The antenna that came with the studs looked really cheap, but the selected stud was a perfect fit. The antenna was Metra/RoadWorks Replacement Antenna Rubber Mast #AW-RM1R Universal. I just tried it and the reception of local and near local stations seems to be as good as the original antenna. Distant stations not as good as the original. For me, based on where I live and where I go, it is perfect! If you get this, be sure to remove the the very thin plastic from around the threads of the stud before lubricating and screwing it in. Hope this helps!
Is that a 3inch Stubby? Do the do 4" ones. Parden the questions about your stubby
Just picked up a Pep Boy's Pilot antenna ANT-029B (thanks ktn419 for the idea) and stuck it on, took about 30 seconds. Like some others, between the XM radio and ipod dock, I never listen to FM/AM...so I'm not really sure how the reception compares.
![]()
I got mine from the same place as D-ride, Universal 14" rubber stubby. I did not like the short ones, reception is still good.
Bad picture from my phone
Could someone explain me why some models don't have an screwable antenna? like mine.
Here's pics of my new "go big or stay home" mast antenna.
2ft Firestik II with HD spring and adapter .....still need wire it up and work out the bugs and made need the Antman!
Supposed to work for CB and AM/FM with this...... AR-1A
Got the idea and bought the adapter from a guy on the FJ forum.
About an inch or so shorter then the oem mast and clears my garage door.
I think you mean threaded antenna not "screwable antenna". 4ths Gens like yours have them embedded in the windshield glass.
screwable : what the Toyota bean counters thought 5th gen owners would be going back to a mast antenna. :bigok:
Here's pics of my new "go big or stay home" mast antenna.
2ft Firestik II with HD spring and adapter .....still need wire it up and work out the bugs and made need the Antman!
Supposed to work for CB and AM/FM with this...... AR-1A
Got the idea and bought the adapter from a guy on the FJ forum.
About an inch or so shorter then the oem mast and clears my garage door.
I like this set-up, please keep us updated!
Finally pulled my Pioneer Nav out yesterday and hooked up the Firestick AR-1A splitter for my Cobra 75 CB and tuned with my SWR . Much to my surprise I'm picking up AM/FM and CB thru the same antenna with great reception!
Wanted to do the same thing for long time, just not sure how to start and how to pull the radio : )
So how did you ground Firestick antenna?
Is there a good space to put splitter behind the stock radio or you put it somewhere else ?
I just followed the lead of others on the FJ forum. Firestik II as FM antenna - Toyota FJ Cruiser Forum
There is room in the center shifter console after you pull it up and I just ran the leads up from there. That's where I Had the box for my Cobra 75 anyways. My Limited has the electronic 4x4 selector so alot more room then yours under there but you should still be able to squeeze it in as it's not that big.
Used the repair manual to remove my radio the first time.