carlodonz
Member
That should be it.
Installing a TRD CAI on a 2020
- Thread starter DryHeatAZ
- Start date
That should be it.
blschaefer1
New member
Got mine installed yesterday on my 2020 ORP. The URD extension cable saves a bunch of time. Great find.
I read in another post about using the bracket that secured the resonator in the stock intake as a mounting point for the wiring bundles. This worked like a charm also. I’m OCD about such things and have the wiring tidy and secure now.
Question - does anyone have experience with how this intake sounds with the stock paper filter versus the TRD oiled filter? My kit obviously came with the oiled filter, and my suspicion is that it is louder than the stock paper filter?? Perhaps I will need to try both. Initial impression is that maybe this thing is too loud!
I read in another post about using the bracket that secured the resonator in the stock intake as a mounting point for the wiring bundles. This worked like a charm also. I’m OCD about such things and have the wiring tidy and secure now.
Question - does anyone have experience with how this intake sounds with the stock paper filter versus the TRD oiled filter? My kit obviously came with the oiled filter, and my suspicion is that it is louder than the stock paper filter?? Perhaps I will need to try both. Initial impression is that maybe this thing is too loud!
I have a URD MAF Calibrator, S&B CAI, and Magnaflow cat-back exhaust and I'm very satisfied with the sound and performance of my 2016 SR5 now. Initially I was worried that the MF would drone and be annoying and too loud, but that is not the case at all. Has a nice note when driving, gets loud when you step on it, but it isn't obnoxious. I have heard good things about the Borla cat-back.
Good Question...if anyone knows if the stock paper filter fits the TRD intake box, please share!
I thought i remembered that someone said the filter size was a little bit different....
youngwas
New member
It should be exactly same. I have installed TRD Cold Air Intake on my 2017 TRD PRO. It's so nice. The sound and the pull that you feel. Use the TRD Oiled Filter and you will feel more difference. I have made Installation video so hopefully, it's helpful.
<iframe width="560" height="315" src="https://www.youtube.com/embed/WNR_ASVXbSo" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen></iframe>
<iframe width="560" height="315" src="https://www.youtube.com/embed/WNR_ASVXbSo" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen></iframe>
Speeder757
New member
Hi All,
I was thinking about Installing a TRD Cold Air Intake on my 2021 TRD Pro. Any issues i should be aware of? My local dealer says the newest part number they can find only fits up to a 2013 4Runner. Also is it worth ordering the URD MAF Sensor Extension Harness if i am going to have the Dealer Install?
Thanks! Appreciate It!
I was thinking about Installing a TRD Cold Air Intake on my 2021 TRD Pro. Any issues i should be aware of? My local dealer says the newest part number they can find only fits up to a 2013 4Runner. Also is it worth ordering the URD MAF Sensor Extension Harness if i am going to have the Dealer Install?
Thanks! Appreciate It!
Very similar to K&N - Here is a link:
Part: PTR43-00083
Amazon.com: TRD Performance Air Filter: Automotive
I also purchased this dry flow filter which fits as well. I do find that the Toyota one is a little harder to get the top on indicating a slightly tighter fit.
Amazon.com: AEM 28-20438 DryFlow Air Filter: Automotive
I have the same AEM already in the stock box and was looking to get the TRD intake, glad to hear there aren't any issues using it. Just looking for a little more growl out of this large V6.
The TRD CAI will fit years up to 2020. Many sites have not updated the year range.
But there is a better way to go: the K&N CAI is half the cost, doesn't move the MAF sensor (no wire extension needed) and uses the same size air filter element as the original. Performance Air Intake System
Speeder757
New member
Speeder757
New member
Saker
Senior Member
No sir, same as I put on my 2014. All the same!
blschaefer1
New member
FYI, I tried the stock paper filter in place of the oiled TRD filter. Can confirm it is indeed a little quieter. Still much more pleasing than the stock intake, just a bit more muted than with the oiled filter. I prefer it.
[email protected]
New member
I ordered mine separately for around $257 total + few item from autozone for $19 .
Order Contents:
P/N Quantity Price Each Description
PTR0334071 1 $ 21.76 TRD, Air Flow Monitor,
PTR0335090AC 1 $ 7.68 TRD Intake Flow Accelerator.
PTR0335090AF 1 $ 62.54 TRD Lower Air Box.
PTR0335090AA 1 $ 81.47 TRD Air Filter Lid.
PTR0389100AA 1 $ 29.28 TRD Intake Air Tube.
PTR0389100AB 1 $ 34.96 TRD Hardware Kit.
Order Summary:
6 products , 6 items $ 237.69
In Store Pickup - Handling Charge $ 0.00
Tax $ 20.20
Total
$ 257.89
Last edited:
Surly Shawn
New member
I just pulled the trigger on the same parts.
Order Contents:
PTR0334071 1 $ 22.27 Service Parts, TRD, Air Flow Monitor, Cold Air Intake.
PTR0335090AF 1 $ 72.36 TRD Lower Air Box.
PTR0335090AA 1 $ 94.26 TRD Air Filter Lid.
PTR0389100AA 1 $ 33.88 TRD Intake Air Tube.
PTR0389100AB 1 $ 40.46 TRD Hardware Kit.
Order Summary:
5 products , 5 items $ 263.23
Coupon - $ 43.75
Shipping & Handling to 62301 $ 43.75
Total
$ 263.23
Shit. Now I see I missed one. I'll have to order that tomorrow or whenever. I also ordered a URD MAF Sensor Extension Harness for NEW STYLE MAF from URD. I hope all this comes in soon, I can't wait to do my first performance mod.
Thank you for listing the part numbers and descriptions. Made them real easy to find.
Do not know if you bought and installed the TRD CAI. But you might want to forego cutting up your wire harness and you and extender instead, It is a little longer than needed but I tucked it out of the way. Underdog Racing sells them.
URD MAF Sensor Extension Harness for NEW STYLE MAF - Underdog Racing Development
have pics of how you tucked the wiring away? Debating if I want to order one or just go ahead with tape and loom I bought.
Would think it would be if its using the same intake hole as stock.
