iPad mounting options?
- Thread starter Will_4R
- Start date
Register to hide this ad
I love my setup, it's rock-solid. It's a Pro-Clip console mount that snaps onto the passenger side of the console, have a 1-inch Ram Mount ball bolted onto it. From the ball is a little Ram Mount arm that holds a Ram Mount EZ-Roll'r iPad cradle. I have a little cradle for my iPad Mini and a bigger one for my iPad Pro.
Neither of them get in my wife's way, and the arm easily pops off the ball for storage. She can easily swivel the iPad to do the navigating as well.
I will say that I prefer the smaller iPad as it stays out of the way of everything a little better.
iPad cradle:
RAM Mount EZ-Roll'r Cradle f/Apple iPad Mini 4
Adjustable connector arm between base and cradle:
Ram Mount Double Socket Arm for 1-Inch Ball Bases RAM-B-201U
Ball-mount on base:
Ram Mount 2 x 1.7 Inches Base with 1-Inch Ball that Contains the Universal AMPs Hole Pattern for the Garmin zumo/TomTom Rider/Urban Rider (Discontinued by Manufacturer)
Base:
ProClip Toyota 4Runner Console Mount - ProClip Console Mount 2010-2018 Toyota 4Runner Item: 834492
Neither of them get in my wife's way, and the arm easily pops off the ball for storage. She can easily swivel the iPad to do the navigating as well.
I will say that I prefer the smaller iPad as it stays out of the way of everything a little better.
iPad cradle:
RAM Mount EZ-Roll'r Cradle f/Apple iPad Mini 4
Adjustable connector arm between base and cradle:
Ram Mount Double Socket Arm for 1-Inch Ball Bases RAM-B-201U
Ball-mount on base:
Ram Mount 2 x 1.7 Inches Base with 1-Inch Ball that Contains the Universal AMPs Hole Pattern for the Garmin zumo/TomTom Rider/Urban Rider (Discontinued by Manufacturer)
Base:
ProClip Toyota 4Runner Console Mount - ProClip Console Mount 2010-2018 Toyota 4Runner Item: 834492
Maadcaap
New member
Arkon Truck or Car Tablet Mount Holder for iPad Air 2 iPad 4 3 2 iPad Pro Samsung Galaxy Tab 4 10.1 https://www.amazon.com/dp/B00585CLSQ/ref=cm_sw_r_cp_tai_cJvqCbW55B49W
This works great.. mount my ipad 12” and its really sturdy.. bolted it to the passenger seat mount bolt..
This works great.. mount my ipad 12” and its really sturdy.. bolted it to the passenger seat mount bolt..
LandCruiser
New member
What's the legality of these?
More and more states have laws against using "mobile devices" while driving which the iPad can be considered by Smokies (who don't seem to be distracted by typing on a laptop while driving).
Yes, I realize the irony that many new cars have screens larger than iPads--especially Tesla.
More and more states have laws against using "mobile devices" while driving which the iPad can be considered by Smokies (who don't seem to be distracted by typing on a laptop while driving).
Yes, I realize the irony that many new cars have screens larger than iPads--especially Tesla.
genesis712
New member
Excellent timing of the post. I have been trying to come up with a system for mounting both the ipad and the ham radio.
I found the RAM HD mount that attaches to the car seat with a rigid aluminum rod. RAM also has a mount thats flexible for about 1/3rd the price of the former.
Thats interesting. No issues whatsoever with the screen moving around off road? This is quite a bit cheaper than what I was configuring with RAM mounts.
phillyd2
Senior Member
Agreed. Went with Ram AFTER trying other opinions.
I think it depends on the exact wording of you local law.
Here it just states that you cannot operate motor vehicle while using a mobile electronic device.
I would consider you to be using the device if the screen is on. Just my opinion.
My setup above has been perfect for me.
Nice I couldn't tell it wasnt bolted in.
Yeah, the little ProClip grabber is awesome.
I use the same Proclip Mount with a Ram XGrip and 6” arm for my mini iPad. The setup works well. I don’t use it often and once you remove the arm, there’s really nothing left to clutter up the interior.
Looks dangerous
Driving on I-35 yesterday San Antonio to Austin. Driver in front of me was crossing lines and speed was fluctuating 65-85. Would not get over to let line of autos pass. When I finally passed in center lane I saw the driver was doing something on iPad mounted on center console. I honked to get drivers attention and driver flipped me off. I just shrugged and kept driving.
I drive a lot with my job and I witness very dangerous driving daily now due to electronics in use while driving. #1 cause of accidents today is hand held devices in use while driving. Even if you are a great driver there is no way you can have 2, 3, 4 electronics mounted on dash, console, passenger seat and not be distracted.
I just read story on our page of a wrecked 4Runner due to other driver using electronics. Do yourself and everyone else on the road a favor and use 1 device, factory nav or phone for voice directions and concentrate on the road. I am sure you are as concerned for your family’s safety as I am for my family.
Thanks
Driving on I-35 yesterday San Antonio to Austin. Driver in front of me was crossing lines and speed was fluctuating 65-85. Would not get over to let line of autos pass. When I finally passed in center lane I saw the driver was doing something on iPad mounted on center console. I honked to get drivers attention and driver flipped me off. I just shrugged and kept driving.
I drive a lot with my job and I witness very dangerous driving daily now due to electronics in use while driving. #1 cause of accidents today is hand held devices in use while driving. Even if you are a great driver there is no way you can have 2, 3, 4 electronics mounted on dash, console, passenger seat and not be distracted.
I just read story on our page of a wrecked 4Runner due to other driver using electronics. Do yourself and everyone else on the road a favor and use 1 device, factory nav or phone for voice directions and concentrate on the road. I am sure you are as concerned for your family’s safety as I am for my family.
Thanks
Hahaha!!! WTF are you talking about? Some of us are off-road enthusiasts.
Last edited:
That looks like a nice low key option. Love the fact that it is no drill.
I like the one for the vent as well, definitely need a place to put the cell phone. Does the plastic around the air vent hold up pretty well against the pressure of the clip? Or does it bow/bend it out a bit?
The ProClip one on the vent is seriously sturdy too. One qualm is that it obviously blocks the vent a little which SUCKS in Texas, but is awesome for CarPlay functionality, especially Waze.
But yeah, the one on the console being no-drill was what attracted me and has been so awesome on the trail.