It is dopamine-inducing how perfectly 3 Plano Sportsman mediums (1719-00) fit

[CementTruck]

Thanks to this review, I ordered three of these too. As advertised, all 3 fit very nicely back there, with some wiggle room. I plan to get some cargo brackets to mount to the floor to keep these from sliding around (albeit the sliding is not too bad due to how well they fit).

 

[PrettyGoodSam]

Thanks for the post and review! These have been added to the list haha

 

[matoolie]

Don't forget the popular mod from Expedition Portal where you can split a standard 5/16" window gasket from Lowes or HD down the middle and place into the lid channel for sealing the container to keep moisture/dust out when outside. Did this myself and works very good.

Pic from Expedition Portal thread

 

[MyanRagahis]

I picked up one of these from Academy for about $27 total. Thanks for sharing OP.
My ViAir, recovery stuff, numerous tie downs and ratchet straps go in there now. Nice to not have everything scattered around anymore.

 

[csw2001]

Happen to have any pictures of your plano bin secured to your rack? Obviously its not a complex method but..curious minds.

Unfortunately out of town until tomorrow then a quick pack up for a backpacking trip so no time to set up and post.

But will post pics of both of my setups soon. I have one for a full family trip (two Plano boxes and a roof bag) and one set up for off-road camping (with one kid) where the roof bag gets replaced by recovery gear and fuel containers.

 

[csw2001]

But it is simple, I have one ratchet on each end and one over the top. Can keep the boxes attached and only loosen one strap to get the tops off. Ratchets attach to eye bolts. This rack is so versatile you can do whatever setup you want. Pretty sure my plan of having two setups simultaneously will work but haven’t had a chance to mount hardware for the fuel cans yet.

It may be I have to get a CBI ladder to access everything properly. At least that’s what the pitch will be to my wife!

 

[alcomedic]

well that was a quick and easy purchase on Amazon. Thank you

 

[Overrunner]

Are these cases sturdy enough to stand/sit on? I was planning on purchasing more wolf packs from Front Runner, but I may have to give these a try.

 

[HavanaTrader]

I'm curious about your cargo net. Where can I purchase one like it?

Sent from my Pixel 3 XL using Tapatalk

 

[andrew4r]

I'm curious about your cargo net. Where can I purchase one like it?

Sent from my Pixel 3 XL using Tapatalk

2010 - Newer Toyota 4Runner 5th Gen (N280) Behind Rear Seats To Floor Barrier Divider Net – Raingler

 

[andrew4r]

Are these cases sturdy enough to stand/sit on? I was planning on purchasing more wolf packs from Front Runner, but I may have to give these a try.

Would depend on your weight, but they're pretty sturdy. I weigh about 170 lbs and the center of the lid is the only thing that bends, and even then just barely.

The underside of the lid has some support ridges. Ex:

 

[2012sr5]

It really is a perfect fit. I've used the three 1719 Planos and a Raingler divider for camping since last fall. Details here.

The versatility of this setup cured me of my desire to build drawers.

 

[DreamsOfDirt]

These cases are great. The alternate configuration below is bit more snug.

For those asking how sturdy they are- 245 lbs sitting on it with barely any flex in the lid.

Sent from my iPhone using Tapatalk

 

[TwistedJake]

These bins have really got me thinking now... In fact, I think I have one here that I used to keep in the back of my truck prior to getting the 4Runner. I will have to run down to my shop and double check.

I was wanting to build a basic drawer system for a couple few reasons.

1) Orginization. Right now there is just so much stuff laying in the back of my 4Runner.

2) I wanted a slide out shelf/platform. Something that I can slide out and use as a table or platform for working on things. The depth of the rear bumper step means that working on anything back there requires you to lean forward and I find it awkward.

3) I wouldn't say security but something to slow down a thief. Not only would it help keep things more out of view I could lock it as one more method to slow anyone down. Would eliminate smash and grabs which is my main concern. I would feel a lot better running in for dinner or grabbing something at the store with my camera bag and rifle locked up in a box rather than on the backseat.

I feel like I could almost build a short platform with a slide out table. Possibly no drawers but just storage for a small tent or other little items. Then have a system on top that would secure a couple few of these Plano containers to it. Wouldn't be as slick but a padlock on a case bolted down would slow anyone down.

Plus with the cases out of the rig daily driver duties would be simpler. Plenty of room for groceries and what not. (Yes, I am a realist and know my rig is 90% daily driver duty and 10% play. Hence the stock size AT tires that get me almost 20mpg still.)

 

[TwistedJake]

How are you anchoring them to the roof rack?

Here is a quick rundown of how I mounted my case to my Prinsu.


Plano case and XBull traction board install on Prinsu rack – 2018 Toyota 4Runner TRD Off Road

 

[ic0517]

Someone else posted a while ago you can replace those coat hooks with rings, its a part on the FJ Cruiser. I replaced mine. I think I have a spare set but I had to move everything around in my work room, can't find anything now. I bought them from Olathe Toyota but any online Toyota dealer should have them.

 

[CementTruck]

Here's how they fit with the slide out tray. I got a set of those velcro cargo blocks to keep them from sliding around. But I also got some carpet cargo mat material to avoid the velcro blocks pulling up the stock carpeting and damaging it. Thanks again for the tip on these containers. They're pretty awesome.

<a href="https://ibb.co/GCpPdkH"><img src="https://i.ibb.co/dkMKf6m/IMG-2425.jpg" alt="IMG-2425" border="0"></a>
<a href="https://ibb.co/6WJx12J"><img src="https://i.ibb.co/kS6f9p6/IMG-2426.jpg" alt="IMG-2426" border="0"></a>
<a href="https://ibb.co/dgmjgKC"><img src="https://i.ibb.co/gV4mVgq/IMG-2427.jpg" alt="IMG-2427" border="0"></a>

 

[Ballsidaho]

Just wanted to share how well these Clevermade collapsible crates fit. I love that they have lids and flatten down when not in use.

 

[andrew4r]

Built a little storage solution this morning that keeps everything under the window line/cargo cover, but lets me slide some shit underneath the containers. :guitar2:

 

[Cpb2019]

I’m a big fan of the 1919s attached to a frontrunner roof rack and a front hitch mounted cargo tray. I have 3 boxes thus far and plan to get a 4th they work so well for my setup. I use rollercam ratchets to tie them down.