JerkyDrewster's 2001 4Runner Build V2

loving the new additions drew!!

WE GOTTA link up soon, 2018 is right around the corner and its beginning to look like a great year to get out and use our rigs! lets plan a MOAB trip
 
infamousRNR said:
loving the new additions drew!!

WE GOTTA link up soon, 2018 is right around the corner and its beginning to look like a great year to get out and use our rigs! lets plan a MOAB trip
Click to expand...

Sorry I'm just seeing this Sean, but we definitely should! Let's get together in the next couple weeks to work something out!
 
January 15th, 2018

Bumper Lights Switch Install

Parts List:
- 2x OTRATTW Lower Independent SPST Switch
- Bunch of Colorful 16ga GXL Wire
- 3/8" Wire Loom

I've had the lights on the truck now for a month or so, but I haven't been able to use them since I didn't have the switches I wanted to use. I planned ahead by wiring the lights up until the firewall, so it made life a bit easier yesterday.

As a common theme to this build, I have been trying to make everything look cleaner and perform better. In order to reduce the number of wires coming through the firewall, I decided to use a common ground and jumper it to both switches, and use the ashtray light's wire in order to power the lower independent light. I made the rest of the harness by very roughly measuring the length of the bulkhead connector to the dash piece beneath the wheel.

I needed a total of 5 wires coming through the firewall and quite a few jumpers which you can see in the pictures coming up. Once that was done, everything was wrapped up using some wire loom to make it look more professional. After connecting the wires to the bulkhead, I routed the loom over the air vent to where the switches would be. Once the lights were tested and I verified that I didn't screw something up, I re-attached the dash!

While there is not a ton more room for switches on that side of the dash, I made the wiring pretty modular if I were to ever add another one over there. Next up to wire is the transmission fan and the rock lights!

On the bench
https://flic.kr/p/23xngsg

https://flic.kr/p/23xngH6

Wires through the dash
https://flic.kr/p/JAx2qc

Connected to the switch
https://flic.kr/p/23xnher

All done!
https://flic.kr/p/JAx31F
 
February 11th, 2018

Hollister Hills SVRA Day Trip

It's been awhile since any update, but I was able to go down to Hollister Hills this past weekend! It was really the first time I got to take it onto the dirt (mud) since I bought it...so I was definitely itching to go. I went out with a couple of my coworkers and a friend who brought a Cherokee.

We had a great time tooling around the obstacle courses and taking mainly blue trails around the park. I ran into trouble off of the first obstacle I took, a log pit that was full of mud. I made it over the first 3 logs then got buried in deep because it was extremely muddy. Definitely the worst I have seen it. Besides that, I was extremely happy with how everything performed, especially the suspension. It felt SO good offroad, but now my LCA bushings are squeaking...

My buddies brought a drone and a camera, so we got some pretty sweet footage throughout the day! If the video gets edited down, I'll share that, but here are some of the cooler photos from the day!

https://flic.kr/p/21DCkrs

https://flic.kr/p/21DCktw

https://flic.kr/p/24pw6Y8

https://flic.kr/p/24pw5Nc

https://flic.kr/p/21DCjzY

https://flic.kr/p/21DCjx3

https://flic.kr/p/24pw5Sk

https://flic.kr/p/21DCjBb

https://flic.kr/p/21DCjDq

https://flic.kr/p/24pw61X

https://flic.kr/p/24pw6Re

https://flic.kr/p/24pw5PV

https://flic.kr/p/21DCjJq

https://flic.kr/p/21DCjFu
 
Last edited:
Great build! Looks really clean, and I really like the way you laid out this thread.

I'm currently looking for my first 3rd gen, and hopefully I'll be starting a thread like this once I get one.

The wheeling pics looks like fun, one of the main reasons I want one is to get back into wheeling. You're buddy has a sweeeet XJ, btw.

And I saw the Polygoats sticker...I've heard of them, I saw some of you guys on Dirt Every Day!
 
Horsethief said:
Great build! Looks really clean, and I really like the way you laid out this thread.

I'm currently looking for my first 3rd gen, and hopefully I'll be starting a thread like this once I get one.

The wheeling pics looks like fun, one of the main reasons I want one is to get back into wheeling. You're buddy has a sweeeet XJ, btw.

And I saw the Polygoats sticker...I've heard of them, I saw some of you guys on Dirt Every Day!
Click to expand...

Good luck on the search; it is definitely a fun part of the process!

And that's too funny about the club! It's crazy someone from across the country has heard of us!
 
February 17th, 2018

Rear Bumper Installation...Part 1

Parts List:
- CBI Rear Plate Bumper

So I received my rear bumper this past Thursday, and I was definitely excited to install it yesterday! Upon unwrapping the pallet, I saw a bit of damage to the powdercoat and bumper itself. It looked like the painter didn't prep the metal properly which caused the powdercoat to chip off. It was mainly apparent on the hitch, so it wasn't a big deal to just repaint it.

I got started by removing the hitch and the stock bumper. I always forget how many bolts are holding the bumper in place, so it definitely took longer than I expected. Once it was off, I started to prep for the new bumper. Since I was by myself, I used 4 jack stands and a 2x4 in order to get it in position. I let it rest on the frame rails before lifting it up into the final spot.

After pushing the bumper up to put the bolts in, it ran into the car's body before the mounting surface touched the frame rail. My best guess is that CBI made the bumper for a 4Runner with a 1-1.5" body lift...BUMMER! I double-checked the order to make sure I selected the correct options.

I'll give them a call either tomorrow or Tuesday if they are closed and go from there. I am hoping to get the correct bumper soon! For now, I will be rocking the no bumper look!

https://flic.kr/p/23oPLoC

https://flic.kr/p/GkVh4S

https://flic.kr/p/23oPPcd

https://flic.kr/p/GkViRu
 
Last edited:
JerkyDrewster said:
Good luck on the search; it is definitely a fun part of the process!

And that's too funny about the club! It's crazy someone from across the country has heard of us!
Click to expand...

The new bumper looks great!

And finding one is my least favorite part, haha. I'm over here checking CL 10 times a day like a junkie looking for a fix.

At which point I'll have to deal with sketchy people from CL and hope I don't get murdered, haha.
 
Horsethief said:
The new bumper looks great!

And finding one is my least favorite part, haha. I'm over here checking CL 10 times a day like a junkie looking for a fix.

At which point I'll have to deal with sketchy people from CL and hope I don't get murdered, haha.
Click to expand...

Well, it would look better if it fit properly. [MENTION=102606]infamousRNR[/MENTION] got a killer deal out of that though. The new one is on it's way from Idaho, and should be in town on Thursday!

Maybe I'm alone on this, but I like buying and selling on CL. It's fun to meet people from all over the place. I even sold my hitch this morning to some dude!
 
JerkyDrewster said:
Well, it would look better if it fit properly. [MENTION=102606]infamousRNR[/MENTION] got a killer deal out of that though. The new one is on it's way from Idaho, and should be in town on Thursday!

Maybe I'm alone on this, but I like buying and selling on CL. It's fun to meet people from all over the place. I even sold my hitch this morning to some dude!
Click to expand...

I've enjoyed it in the past, but the idea of showing up to some strangers house with 4 or 5k in cash sketches me out. Especially as a lot of the ads I see for these are obvious scams, it's the ones that maybe AREN'T so obvious that worry me.

The older I get. the more antisocial/suspicious I get, apparently.
 
JerkyDrewster said:
Some fun things are in the works for the next few weeks. I'm excited for a more challenging project to tackle that will take more than a day or two!

More pictures definitely to come on this install.
Click to expand...

dang, really interested in this install! very cool
 
March 4th, 2018

Rear Bumper Installation...Part 2

I was able to work it out with CBI, and got the new bumper Saturday morning, making it about a 2 week turnaround. My company had a big party in SF that night, so I definitely wasn't going to be able to get any work done until Sunday. I had already set everything up, so the install was going to be quick.

Once I got back from the city, I started by removing the rear shock reservoir mounts. The place I had them installed overlapped one of the bumper mounts, so I would have to relocate them slightly. I had a couple of my neighbors help me lift it into place while I guided it over the exhaust and put a few screws in. After that, it was just a matter of getting the 2 sets of bolts deep in the frame into place. The first set went in fine, but I had some trouble wiggling the second to fully seat.

With all of the bolts in place (minus the 2 I still need to drill a hole in the frame for), I started working on the reservoir mounts. I liked their current location, so I just drilled a new hole ~1.5" towards the front of the car. This allowed plenty of room for the mount to clear the bumper.

With everything ready to go, I torqued all the bolts down and got to admire the beauty of this bumper!

https://flic.kr/p/FfNbTn

https://flic.kr/p/FfNc7t

https://flic.kr/p/FfNc1r

https://flic.kr/p/FfNdtM

https://flic.kr/p/FfNcn8

https://flic.kr/p/FfNcTi
 
Last edited:
Looks great!

Excited to see how the keyless entry comes along. After just getting out of a 2015 Focus ST thats keyless, i tend to leave my keys in the ignition expecting the car to turn itself off. Hahah. Have walked away a few times forgetting them inside! :dammit:
 
ConQueso said:
Looks great!

Excited to see how the keyless entry comes along. After just getting out of a 2015 Focus ST thats keyless, i tend to leave my keys in the ignition expecting the car to turn itself off. Hahah. Have walked away a few times forgetting them inside! :dammit:
Click to expand...

Thank Jake! I can't wait to get it installed! Hoping to start sometime next week when I get a little more free time.
 
I'm digging the rear bumper! And definitely curious in seeing how the keyless entry works out.

Sent from my SM-G930V using Tapatalk
 
Awesome runner man. Excited to see the updates on keyless entry.

Yours really makes me wish I would have went with 285s..
 
krutoydiesel said:
That bumper looks stunning.
Click to expand...

Silver.T4R said:
I'm digging the rear bumper! And definitely curious in seeing how the keyless entry works out.
Click to expand...

kale2s said:
Awesome runner man. Excited to see the updates on keyless entry.

Yours really makes me wish I would have went with 285s..
Click to expand...

Thank you all! It's definitely nice to have the rear bumper again. It definitely ties it all together.

The keyless entry and push start installation has been going pretty well. I had a power issue for a day or so, but now that that is ironed out, the car turns on! Now I just need to finish wiring the keyless portion and I will be good to go.
 
You must log in or register to reply here.

Members online

Total: 883 (members: 6, guests: 877)

Forum statistics

Threads
278,312
Messages
3,554,089
Members
248,016
Latest member
Advally Service

Share this page

Trending content

Back
Top