I'm sorry, who to contact for these? I just need the passenger dome and the reverse lights. Thanks!
The OP is So_LED. He's the one selling these.
Can someone post pics of the interior light installation for those of us who are mechanically challenged? I am having trouble with the puddle lights, center dome lights, tailgate lights and the lights above the center console (pretty much the entire interior lights!). I don't want to break clips and spend more money installing the lights. Thank you in advance.
The only lights that I actually figured out are the lights above the sun visors (the clip location is on the left hand side for both sides; just insert flat head screw driver from the left and it will pop off) and the license plate lights.
Map lights:
- Open the sunglasses holder and look up inside of it.
- Unscrew the 2 screws
- Slightly slide the whole upper center console backwards and it should come down. If it needs some gentle persuasion, do it, but gently.
- Directly above the lights are 2 twist out caps. Untwist 1/4 turn and pull them out.
- Change out the bulb.
Rear hatch lights:
- The rear hatch doors remove with a screwdriver from the drivers side between the plastic frame and hatch. The spring clip is deep in there, so just push a little farther when you're wondering how far it should go. That was the point it popped out.
- Reassemble that cover to the light housing before putting those back in the rear hatch.
- The center dome light replacement is BRIGHT, maybe too bright? I am considering a small light to replace the large panel. Either way, it's a tight fit, but with a little effort, it will seat in there.
- If the LED doesn't light up, try flipping it around. You probably have the leads reversed.
Center console light:
- Gently pry the cover off from the front of the vehicle side.
Mirror lights are covered in the thread already
Door lights:
- These all opened from the bottom right side of the light, actually underneath on the right.
- There is an odd shaped cover over the bulb. Remove that via the large clip, but be careful when reinstalling it on your LED.
Reverse lights:
- The manual shows to open the rear panel from the side closest to the vehicle front, and about 2" up. Easy to pop out.
- The middle one is another twist out housing.
- Hit the parking brake and make sure the lights work. DO NOT LOOK INTO THEM. THEY ARE BRIGHT AS ****.
I installed mine this afternoon, and they are stellar and BRIGHT. I can't tell you how much I hate the standard 2-3k yellow color lighting that is typically seen. Anyway, these look to be in the 5k range, and just as jhawk's pictures show, these are BRIGHT. My wife even liked it.
It took a little while for my lights to get here, but the important thing was that they arrived, work well, and it's a pretty easy installation. I only needed 1 phillips head and 1 flat head screwdriver for everything. Great mod and well worth the time.