Level 8 MK6

[Dr_Dooms]

Just put mine on a couple of days ago!

 

[3sash3mi]

What size tire? I just ordered the same exact specs, cause I couldn't pass up the deal Discount Tire was having on Ebay. I've done research and some people are running exact specs with 275's with no rubbing.

I have stock (265/70/17) sized BFG KO2 tires. I took the mudguards off before my trip to death valley last weekend, It still rubs on the fender on reverse with wheels turned in. But moving forward it does not even at fully locked position. There are discussion threads on this interesting behavior. But it is pretty close enough such that I will not be able to go to a larger tire. I am pretty sure that it is the 1.25 wheel spacers I have. Later on i may take the front spacers off. Or may be get wheels with 0 offset or that like my earlier level 8 punch wheels (+18)

I wonder why Level 8 is discontinuing the wheels.

 

[klum17]

Just put mine on a couple of days ago!

Man that looks killer. I have a magnetic grey too. I just looked on eBay and didn't see any more of these wheels! They would look great with the new BFG KO2 I just got from discount tire.

 

[Dr_Dooms]

Man that looks killer. I have a magnetic grey too. I just looked on eBay and didn't see any more of these wheels! They would look great with the new BFG KO2 I just got from discount tire.

Thanks man!!
I got a great deal on them too, on eBay discount tire was having a $100 off when you spend $400 or more. I got them shipped for $470!

 

[klum17]

Thanks man!!
I got a great deal on them too, on eBay discount tire was having a $100 off when you spend $400 or more. I got them shipped for $470!

what offset did you go with?

 

[kevstaarr]

17x9 -12 wrapped in Falken Wildpeak A/T3W 265/70/17

Minimal rubbing at full lock, just a little more minor adjustments & it'll be good. It doesn't bother me that much, I'll probably get around to trimming the bumper & modifying the mud guard over the weekend.

 

[SSDuck8]

here is mine with 285/70r17 Mickey Thompson MTZ

 

[Dr_Dooms]

17x9 -12 wrapped in Falken Wildpeak A/T3W 265/70/17


Minimal rubbing at full lock, just a little more minor adjustments & it'll be good. It doesn't bother me that much, I'll probably get around to trimming the bumper & modifying the mud guard over the weekend.

That looks great in the bronze!

what offset did you go with?

I went with the 0 offset

 

[jasonv]

Would people agree/say the matte bronze mk6 is more goldish than the matte bronze konig 6 shooter?

 

[tc05runner]

Just put mine on a couple of days ago!

What width of a wheel did you go with? It looks awesome. I can't decide whether to go with a 8 or 9. I have 295/70/17 Toyo MT

 

[Dr_Dooms]

What width of a wheel did you go with? It looks awesome. I can't decide whether to go with a 8 or 9. I have 295/70/17 Toyo MT

I went with the 8 wide 0 offset.
tire size is a 285/75/17

 

[tc05runner]

I went with the 8 wide 0 offset.

tire size is a 285/75/17

I ended up with 8 -10 offset. That's all that was left. There's no more mk6 available now. Completely gone

 

[tc05runner]

Actually sticks out more than I wanted too or expected. But no fitment issues.


Sent from my iPhone using Tapatalk

 

[Dr_Dooms]

I ended up with 8 -10 offset. That's all that was left. There's no more mk6 available now. Completely gone[/QUOTE]

Looks good! I like the gunmetal too!

what lift do you have?
Do the 295's rub?

 

[tc05runner]

Looks good! I like the gunmetal too!

what lift do you have?
Do the 295's rub?

They do not at all. But yet I had 285s with no lift so I cut to fit at that point but on the body mount I have another 1&1/4 inch of clearance. I have trail team bilstiens off an FJ with the FJ coils plus a 2.5 daystar spacer and 1.5 in spacer In the rear.

Here's a better angle. Thanks btw !

 

[tc05runner]

It is higher In the front. I'm in the market for some new rear coils and hopefully have some rake.


Sent from my iPhone using Tapatalk

 

[bartvonwolf]

Just received my set of Level 8 MK6s in Matte Black -10. These wheel are nice. However like many of you, I am not a huge fan of the center caps. So, just FYI, acetone on a soft rag removes the Level 8 logo safely and easily. I know have nice plain black center caps! You can barely make out a slight ghost of the logo, but it is almost completely gone!

Bart

 

[tman100z]

Mk6

Has anybody went with the 18's with the MK6??

 

[commbubba19]

I run 18x9 0 offset with 285/60/18 tires.

 

[tman100z]

I run 18x9 0 offset with 285/60/18 tires.

Do you have a link to any pics of your truck ??