Lift and Tire Central (pics)... Post 'em Up!

I have the OME 895 with the 5100 in the rear of my rig and I can tell everyone here that for my style of off road, fast on road driving and fast off road driving, for an off the shelf shock the rear balance of my truck is pretty dam good. When I go out, I do have some weight. Mostly your typical trail gear, food coolers recovery gear ect. I was pretty impressed at the compression and rebound control of this particular package. Now up front, well that's a different story. I'm running the 5100 in the second to highest setting, plus a toytec/Eibach 2" 620lb spring. This package is a bit off, but for a total off the shelf cheap kit, it's pretty cool. Soon I'm buying some rebuildable foxes in order to dial the front in. With my current front package, it needs to have the rebound worked on. Once the rebound gets sorted out this truck for who it is will really work nice. But I'm not complaining. I chose this package on my own knowing full well what I was getting. And for a 100% off the shelf kit, my particular package hauls ass on and off road fast or slow. I would define my kit as the perfect off the shelf bolt on all around Sport Kit for any and all surfaces.

can you post a pic of your runner?
 
Finaly (almost) done

Still want to get sliders and eventually front bumper.


IMG_003.jpg

IMG_004.jpg
 
So I have OME 884's, Superflex's, and Bilstein 5100's as the lift on my '03 SR5. You think I can fit LT285/70/17 GY MT/R Kevlars without any rubbing? Current tires are 265/65/R17 GY Adventure Kevlars and they're looking a bit small for when the time comes to replace em.
 
So I have OME 884's, Superflex's, and Bilstein 5100's as the lift on my '03 SR5. You think I can fit LT285/70/17 GY MT/R Kevlars without any rubbing? Current tires are 265/65/R17 GY Adventure Kevlars and they're looking a bit small for when the time comes to replace em.


Not sure about 285/70/17 but I run 255/75/17 and have no rubbing other than full lock in reverse. And it barely rubs.
 
So I have OME 884's, Superflex's, and Bilstein 5100's as the lift on my '03 SR5. You think I can fit LT285/70/17 GY MT/R Kevlars without any rubbing? Current tires are 265/65/R17 GY Adventure Kevlars and they're looking a bit small for when the time comes to replace em.

I have the exact same lift on my '03 and am running 285/75 18 BFG KO's. I had a little rubbing so I removed the mud flaps, pulled the fender liners forward and trimmed just a litt le of the fender.
 

Members online

Forum statistics

Threads
278,316
Messages
3,554,121
Members
248,016
Latest member
Advally Service

Trending content

Back
Top