Lift and Tire Central (pics)... Post 'em Up!

The 60 is a bit rough, but she's still kicking
20150829_142839.jpg


DSC03606.JPG


DSC04109.JPG


ibe-cZ5abF-z4oCKRMJDL-jNBXxTHOQPgSvPEIMWy6s
 
Last edited:
[MENTION=105683]davidaw[/MENTION] what do your alignment numbers look like? I think I see stock UCAs

Yep they are still stock
I got the alignment done a year and a half ago after the lift.
No issues other than boot blowouts.

Dave
 
Got the RB 1.25" body lift installed with the 265/65/18 tires. Haven't gotten to the bilstein and ome885s yet, but that's next and then the spidertrax can go on too.
 

Attachments

  • 20160319_121528.jpg
    20160319_121528.jpg
    133.3 KB · Views: 2,374
I have a 3" lift with uniball UCA's and stock wheels and tires. Can I put 285/70/17 tires on the stock wheels or will It be too wide and rub on the UCA? I know it will rub a little on the bumper and body mount before trimming.
 
I have a 3" lift with uniball UCA's and stock wheels and tires. Can I put 285/70/17 tires on the stock wheels or will It be too wide and rub on the UCA? I know it will rub a little on the bumper and body mount before trimming.

i ran 285/70r17 cooper st maxxs on my stock FJ wheels which are the same 7.5 inches wide as the stock runner wheels. i just put my 35x12.50r17 treadwright guarddog MTs on the same wheels with zero issues. you shouldnt have any issue with the ucas or the like just the typical plastic and related items.
 
just put my new 35x12.50r17 treadwright guarddog MTs on this this weekend need to go on a shake down run to figure out the areas that are gonna rub at full flex
 

Attachments

  • IMG_20160318_141216.jpg
    IMG_20160318_141216.jpg
    137.7 KB · Views: 2,248
  • IMG_20160320_142305.jpg
    IMG_20160320_142305.jpg
    140.6 KB · Views: 2,261
  • IMG_20160320_142349.jpg
    IMG_20160320_142349.jpg
    137 KB · Views: 2,245
  • IMG_20160320_142416.jpg
    IMG_20160320_142416.jpg
    129 KB · Views: 2,231
  • IMG_20160320_142338.jpg
    IMG_20160320_142338.jpg
    136.6 KB · Views: 2,220
  • IMG_20160315_184423.jpg
    IMG_20160315_184423.jpg
    133.1 KB · Views: 2,230
Last edited:
[MENTION=134758]SoSoRunner[/MENTION]
Hi, care to elaborate on this a bit more? Is this boot blowout common with stock UCAs?

Hey, Replied to your PM.
I think boots typically go after a lift. Especially when they have 90K on them.
I dont think the UCAs had any bearing on that.

DAve
 
Nothing special here. Thinking of removing the mud flaps in the front and rear, not that it rubs. But maybe a better look?

Bilstein 5100
FJ 4x4 Trail Springs
265/70/17 BFG KO2


What setting are your front 5100's? Like the way this site, not too much and looks gewd
 
I've never seen "good" spelled anywhere close to that...

That the trendy way of doing it keeping things fresh. Most words now a days aren't spelled correctly anymore with all the different word styles people are using ...I mean honestly this is how we spell words now :AK47: and finish sentences with f ing "emoji's" and what makes that a correct spelling.
People don't need to think about spelling anymore cause our phone and computers think of our next word for us and correct us when there was no need and you end up correcting it. But most don't prof read and we'll all know when you see someone's post or a text that the auto correction messed up but it's funny we read it as its really suppose to be and its a completely different word.

So I think correcting someone in these forums is not needed and pointless.
We all can see and actually read what was meant, no need to point out the obvious.

Cause even Siri is perfect.
 
That the trendy way of doing it keeping things fresh. Most words now a days aren't spelled correctly anymore with all the different word styles people are using ...I mean honestly this is how we spell words now :AK47: and finish sentences with f ing "emoji's" and what makes that a correct spelling.
People don't need to think about spelling anymore cause our phone and computers think of our next word for us and correct us when there was no need and you end up correcting it. But most don't prof read and we'll all know when you see someone's post or a text that the auto correction messed up but it's funny we read it as its really suppose to be and its a completely different word.

So I think correcting someone in these forums is not needed and pointless.
We all can see and actually read what was meant, no need to point out the

Cause even Siri is perfect.
I know, it was just funny
 
5100's all around - 2885's in front, Superflex rear (v8) w/ spidertrax on 275/65

I don't take her offroad (yet, I want to at some point) so it's more than enough for me.

 
What setting are your front 5100's? Like the way this site, not too much and looks gewd

i cant remember what the previous owner told me. he installed brand new bilstein and fj springs for me before the sell. the car was stock other than the springs and shocks. but i did measure my car against a stock one. i was about 3 inches higher in front. and .75 in rear. hope that helps.
 

Members online

No members online now.

Forum statistics

Threads
278,316
Messages
3,554,121
Members
248,016
Latest member
Advally Service

Trending content

Back
Top