Lift and Tire Central (pics)... Post 'em Up!

[Bonzi]

New tires!! 285/75R17 Yokohama Geolandar MT G003

Looking really good. I am ready to pick up a set of 285/70/17's. How do you like your tires so far?

 

[suh-c]

Bought my first 4R in 2016 and finally got around to lifting 3" front and 2" rear with TRD wheels wrapped in AT2s.

 

[That_Titanium_4RNR]

Looking really good. I am ready to pick up a set of 285/70/17's. How do you like your tires so far?

Absolutely love them! and thank you

 

[dakine1]

Just picked up 003 T4R!

Just picked this up and immediately added daystar 2.5/1.5 leveling kit. Fuel wheels 17x8.5 wrapped in 285/70/17’s

 

[The-Wood]

Just picked this up and immediately added daystar 2.5/1.5 leveling kit. Fuel wheels 17x8.5 wrapped in 285/70/17’s

Looks clean! Love it! Curious what you (or others) ended up getting for hub to fender measurements with the daystar spacers?

Love that blue by the way!

 

[Drift Monkey]

 

[micRevolution]

Bought my first 4R in 2016 and finally got around to lifting 3" front and 2" rear with TRD wheels wrapped in AT2s.

That looks clean!

What rear spring are you running?

 

[JBend]

Nothing crazy here just me being happy it's finally done. Eibach pro truck lift kit set on recommended bottom notch. Wheelers quarter inch spacer put on drivers front side. Brand New Toyo open country at2's. No aftermarket UCA/LCA or sway bar end links needed nor body mount or mudflap removed. No rubbing at full lock in either direction. Happy boy here.

 

[dakine1]

Thanks!

Looks clean! Love it! Curious what you (or others) ended up getting for hub to fender measurements with the daystar spacers?

Love that blue by the way!

I have no clue what the measurements are. Had a shop do it cuz I was lazy. Lol.

Thanks for the compliment!

 

[rich dog]

285 bfgs, bilstein/toytec springs in the rear, icons in the front.

 

[06_dark_knight]

285 bfgs, bilstein/toytec springs in the rear, icons in the front.

I’m running icons up front too with Toytec rear shocks and HD springs and 285’s

 

[jimenezV84R]

Happy to join the 4runner family. Picked this 4th gen at the start of the pandemic.

Radflo 2.5 all the way around. Total Chaos UCA. 285/70/17 on Rays 10 -38 offset.

 

[momo.75]

Happy to join the 4runner family. Picked this 4th gen at the start of the pandemic.

Radflo 2.5 all the way around. Total Chaos UCA. 285/70/17 on Rays 10 -38 offset.

Looks great!

 

[dakine1]

Lookin good!!!! Love the setup!

 

[montijo505]

Happy to join the 4runner family. Picked this 4th gen at the start of the pandemic.



Radflo 2.5 all the way around. Total Chaos UCA. 285/70/17 on Rays 10 -38 offset.

Looking good!

Sent from my SM-G986U using Tapatalk

 

[dcraddo03]

Looks really good! I just got the same tires, looking to swap out my Tacoma suspension swap for something like what youve got.

Do you have a link to the rear springs you used? Are you running OEM shocks in the back?

Hey, thanks man! Sorry for the inactivity -- I haven't been on the forums in about two weeks. Here is exactly the kit that I got. I have no doubt in my mind that you can find it cheaper than found here. The springs in the back are the "Rear Coil Springs Heavy Load Package 400 Pound Constant Weight 36-281831." Good luck and keep us posted!

 

[Gkhuang]

First lift!

First lift for my 07 SR5 4WD V6.

Wanted to go no more than 2.5" and am pretty satisfied with the outcome.

- Bilstien 5100 all around, front set to 0"
- OME springs: 884 front, 895E rear

avoided UCA's for now..

slight rub on full crank in reverse, any recommendations to alleviate the issue aside from the obvious trimmings? Thanks!

 

[suh-c]

That looks clean!

What rear spring are you running?

Thanks! I went the the ToyTec 2".

 

[dcraddo03]

Looks great! Where'd you get that grille at? Love the way it compliments the rest of the truck. Need one for mine as long as it isn't $400 haha

 

[Drift Monkey]

Looks great! Where'd you get that grille at? Love the way it compliments the rest of the truck. Need one for mine as long as it isn't $400 haha

Hey thanks man! I made it myself actually! Yeah, I tried to do some black accents around and I'm pretty pleased with how it came out.