Asaspades93
New member
I want those wheels ^:rockon:
Lift/Tire/Wheel central
- Thread starter Asaspades93
- Start date
Asaspades93
New member
Yessir
Graham Hanna at Ed Morse in Florida hooked it up! Paid 911.60 with tax and shipping for 5 wheels!
LookAtThatDog
New member
Tundra trd bilstein 5100. 3rd notch in front. 5100 in rear with lc 8 wraps. Goodyear duratracs 285/75r16. No spacers. LR uca.
Would those rub the stock UCA?
kammando808
New member
lol sorry that's not my led bar it's my wink mirror just wrapped in camo duct tape which makes it look the a light bar, haha got a lot of people asking about that so recently I took the tape off
RicMan
New member
What I got
Alright I could use some help figuring out what exactly I have and what I should change or keep the same. I have never touched my suspension other than adding 1.5in spacers in the back to fix the rake. I've had my runner for about 5 years now, the previous owner did some suspension work to raise the ride some but I have never had the expertise or money to check it out and fix what needs fixing.
So heres what I have:
Bilstein 4600s all around (I'm pretty sure they're 4600's, the blue and yellow ones)
Stock springs all around (I'm pretty sure, could be wrong)
1.5" spacers in the back to fix the rear sag, added about a year of ownership
I have never measured how much higher than stock I ride, but I would estimate it about 2-3".
I have 223k on her. I dont know if the springs have ever been replaces, but lately I have been noticing a pretty rough ride and sag in the back with a minimal load.
My tax return is on its way so if any of this is wrong or easily upgraded I would like to fix it.
Would OME 891's work with the 4600s in the back? I carry a pretty heavy load for interstate trips most weekends so I'd like to keep the ride balanced, fairly smooth, and lifted.
Any help is appreciated, again I'm new at this. Thanks in advance.
Heres how she sits now:
Alright I could use some help figuring out what exactly I have and what I should change or keep the same. I have never touched my suspension other than adding 1.5in spacers in the back to fix the rake. I've had my runner for about 5 years now, the previous owner did some suspension work to raise the ride some but I have never had the expertise or money to check it out and fix what needs fixing.
So heres what I have:
Bilstein 4600s all around (I'm pretty sure they're 4600's, the blue and yellow ones)
Stock springs all around (I'm pretty sure, could be wrong)
1.5" spacers in the back to fix the rear sag, added about a year of ownership
I have never measured how much higher than stock I ride, but I would estimate it about 2-3".
I have 223k on her. I dont know if the springs have ever been replaces, but lately I have been noticing a pretty rough ride and sag in the back with a minimal load.
My tax return is on its way so if any of this is wrong or easily upgraded I would like to fix it.
Would OME 891's work with the 4600s in the back? I carry a pretty heavy load for interstate trips most weekends so I'd like to keep the ride balanced, fairly smooth, and lifted.
Any help is appreciated, again I'm new at this. Thanks in advance.
Heres how she sits now:
Attachments
Is it possible??
I am looking to run 295/55/20 with jba off-road upper control arms, I will be going with 20x10 fuel rims and probably going to do a body chop kit. I am just wondering if this will work without major cutting or modification besides the body chop. I have a toyotec boss lift which is 2" in the rear and 2.75 in the front. Just need some advice and opinions.
I am looking to run 295/55/20 with jba off-road upper control arms, I will be going with 20x10 fuel rims and probably going to do a body chop kit. I am just wondering if this will work without major cutting or modification besides the body chop. I have a toyotec boss lift which is 2" in the rear and 2.75 in the front. Just need some advice and opinions.
YourUncleFats
New member
More pics please...
Not to be bossy... but there are to many will this fit my truck questions and not enough pictures! Need some more 3rd gen tire and wheel porn please!!!
Not to be bossy... but there are to many will this fit my truck questions and not enough pictures! Need some more 3rd gen tire and wheel porn please!!!
theesotericone
New member
Hellyeah I wanted them in black, but they wern’t available anymore..so settled with the brushed/ silver look.
Nice rig and really nice choice on the wheels. lol
Scramble
New member
Sonoran Steel 7.2 lift with LC 8 wraps in place of the OME 890's.
All-Pro UCA's, 1" BL & 1.5" wheel spacers. No rubbing & no trimming required.
285/70/17 Hankook Dynapro MT's.
4Runner Car Wash 021 by Mike Campbell, on Flickr
4Runner Car Wash 020 by Mike Campbell, on Flickr
4Runner Car Wash 017 by Mike Campbell, on Flickr
All-Pro UCA's, 1" BL & 1.5" wheel spacers. No rubbing & no trimming required.
285/70/17 Hankook Dynapro MT's.
4Runner Car Wash 021 by Mike Campbell, on Flickr4Runner Car Wash 020 by Mike Campbell, on Flickr4Runner Car Wash 017 by Mike Campbell, on FlickrSimilar threads
