aggrobot
New member
Thanks very much! Im pretty happy with how it turned out. Those wheels dont like to be photographed and sorta blend in with the tires, but they are more distinct IRL.
Limited Edition Mod Thread
- Thread starter jwatson
- Start date
Thanks very much! Im pretty happy with how it turned out. Those wheels dont like to be photographed and sorta blend in with the tires, but they are more distinct IRL.
Humble Leader
Senior Member
did you swap the rocker trim as well? it looks like the version from the trails
2021nightshade4x4
New member
Interested to know, want to know if running boards could now fit more than half a foot
Sent from my iPhone using Tapatalk
aggrobot
New member
These are the nightshade stock rocker trim/panels.
Ive ordered the n-fab nerf side steps for the limited, and I’ll share additional pics once installed. It sounds like you may already be familiar with these. Hopefully they dont look like hell. My wife is a little over 5 feet tall and she needs the steps now, hah.
Sadly with it being overcast out here,not many great pics I can take over the past few days. Ill try to share some more that are a more complete side profile, and hopefully a bit better lit to help you kinda see whats going on a lil better. Here’s another try anyway!
Last edited:
aggrobot
New member
I have about 700 miles on the new suspension and two severe snowstorms on the cooper at3 4s. Best handling tire I’ve ever had for wet/snow conditions. Nerf bars steps installed. After the ECU retune I’m seeing close to stock MPG numbers but still gathering more info. Couldn’t be happier. Hope you’re all having a great weekend.
Humble Leader
Senior Member
Had a wooden shift knob made from a fellow on Etsy and I think it turned out great!
looks really unique. I like it. link the page!
aggrobot
New member
RodakGarage - Etsy
If I could do it all over again, I might ask for something that spans the length of the shifter a bit more. Even still, really happy with this. Maybe I’ll reach out for another in a few years. They’re very reasonable.
Last edited:
SoCal5thGen
New member
Limited Tires and Bumper Q's
Looking for recommendations for the following:
1) AT tires for the stock 20 inch wheels. I remember researching this a few years ago and concluding there were no good options. Has that changed?
2) Best fitting rear bumper option to replace damaged stock bumper? Ideally aluminum but I think that maybe is not on option from my research; so steel would work as well.
Thanks!
Looking for recommendations for the following:
1) AT tires for the stock 20 inch wheels. I remember researching this a few years ago and concluding there were no good options. Has that changed?
2) Best fitting rear bumper option to replace damaged stock bumper? Ideally aluminum but I think that maybe is not on option from my research; so steel would work as well.
Thanks!
SoCal5thGen
New member
Is it the OEM bumper or aftermarket? How much? Thanks!
DannyLlama
Elite Member
3D Printing fun
Repurposing useless holes
<a href="https://hadibege.zenfolio.com/p646593257/e69f5d034"><img src="https://hadibege.zenfolio.com/img/s/v-10/p1777717300-3.jpg" width="338" height="450" alt="BlackSheepOdyssey: 4R &emdash; " /></a>
Repurposing useless holes
<a href="https://hadibege.zenfolio.com/p646593257/e69f5d034"><img src="https://hadibege.zenfolio.com/img/s/v-10/p1777717300-3.jpg" width="338" height="450" alt="BlackSheepOdyssey: 4R &emdash; " /></a>
Thanks rockymountaint4r for the redirect to this thread.
Trolled this forum for 2 years. Lots of help. Here’s my build result for those who may find it helpful. Cheers.
Interior
Touch Screen protector
• Brand: WONDERFULHZ 2020+
• From: Amazon
• My Rating: 10/10
• Would I buy again? Yes
Center Console tray
• Brand: JKCOVER
• From: Amazon
• My Rating: 6/10
• Would I buy again? Meh. Prob not.
• Notes: not a fan of not being able to close the console unless the tray is pushed forward. It slides back a lot and is annoying
LED INTERIOR Bulbs
• Brand: AUTOGINE 16 piece LED 6000K
• From: Amazon
• My Rating: 8/10
• Would I buy again? Yes
• Notes: YouTube various install videos before you do this. Then it’s easy. Bright, might be too much for some. Did not install in vanity.
Cell phone holder cup mount
• Brand: CTYBB cup holder cradle
• From: Amazon
• My Rating: 7/10
• Would I buy again? Yes, a tad wobbly tho
Molle panel and upper Molle
• Brand: Tac1
• From: Tac1
• My Rating: 5/10
• Would I buy again? Prob not, different brand yes, prob would have done rago
• Notes: not the best fit as far as angles. had to bend each bracket 20 more degrees, that’s not easy. Also switched out the 1/4 fasteners for M6s, why mix types in a truck that is metric? Rattles. But. I really like the roof Molle for fishing rods. So. Meets my needs. Fasteners droop, and rattle. I’m an engineer and have ocd. This drives me nuts.
Front camera and rear override
• Brand: Anytime
• From: Anytime
• My Rating: 8/10
• Would I buy again? Yes
Notes: about a 5hr job if you are anal. Wanderlost overland on YouTube helped research. Put center low. Good fit.
Exterior
Tint - Front windows
• Brand: 3M 20%
• From: some guy down the street
• My Rating: 8/10 (decent match)
• Would I buy again? Yes
Roof rack
• Brand: Prinsu, full length no drill
• From: Prinsu
• My Rating: 8/10
• Would I buy again? A rack? Yes. This one? On the fence
• Notes: modified mounting for no silicone. Search no drill no silicone thread for details. I Very much like the prinsu profile vs others. 2” cross bars better for my needs than some others which are 3” a few taps were short, and one of the large fender washers rusted in 1 year. In socal.
Suspension/ Tires / Wheels / Drivetrain
Throttle Response Aftermarket
• Brand: Pedal Commander
• From: Amazon
• My Rating: 10/10
• Would I buy again? Yes
• Comments: city 2 setting. Game changer
Suspension
• Brand: Bilstein 6112/5160 @ 2.75”/2.0” height + SPC UCAs
• From: Bilstein and OME, via 88Rotors in LA
• My Rating: 10/10
• Would I buy again? Yes!
• Comments: Really like the balance of city/off-road. Was XREAS which honestly was not bad. Super plush on washboards.
Tires and Wheels
• Brand: Icon vector 6, Toyo AT3 P285/70R17
• From: Icon, Toyo via 88Rotors in LA
• My Rating: 10/10
• Would I buy again? Yes
• Comments: quiet, combo same weight as stock. Required fender liner mod, mud flap delete, and for me a BMC. I think I could have pushed the caster forward and avoided a BMC but, now any idiot can do an alignment without worry.
Trolled this forum for 2 years. Lots of help. Here’s my build result for those who may find it helpful. Cheers.
Interior
Touch Screen protector
• Brand: WONDERFULHZ 2020+
• From: Amazon
• My Rating: 10/10
• Would I buy again? Yes
Center Console tray
• Brand: JKCOVER
• From: Amazon
• My Rating: 6/10
• Would I buy again? Meh. Prob not.
• Notes: not a fan of not being able to close the console unless the tray is pushed forward. It slides back a lot and is annoying
LED INTERIOR Bulbs
• Brand: AUTOGINE 16 piece LED 6000K
• From: Amazon
• My Rating: 8/10
• Would I buy again? Yes
• Notes: YouTube various install videos before you do this. Then it’s easy. Bright, might be too much for some. Did not install in vanity.
Cell phone holder cup mount
• Brand: CTYBB cup holder cradle
• From: Amazon
• My Rating: 7/10
• Would I buy again? Yes, a tad wobbly tho
Molle panel and upper Molle
• Brand: Tac1
• From: Tac1
• My Rating: 5/10
• Would I buy again? Prob not, different brand yes, prob would have done rago
• Notes: not the best fit as far as angles. had to bend each bracket 20 more degrees, that’s not easy. Also switched out the 1/4 fasteners for M6s, why mix types in a truck that is metric? Rattles. But. I really like the roof Molle for fishing rods. So. Meets my needs. Fasteners droop, and rattle. I’m an engineer and have ocd. This drives me nuts.
Front camera and rear override
• Brand: Anytime
• From: Anytime
• My Rating: 8/10
• Would I buy again? Yes
Notes: about a 5hr job if you are anal. Wanderlost overland on YouTube helped research. Put center low. Good fit.
Exterior
Tint - Front windows
• Brand: 3M 20%
• From: some guy down the street
• My Rating: 8/10 (decent match)
• Would I buy again? Yes
Roof rack
• Brand: Prinsu, full length no drill
• From: Prinsu
• My Rating: 8/10
• Would I buy again? A rack? Yes. This one? On the fence
• Notes: modified mounting for no silicone. Search no drill no silicone thread for details. I Very much like the prinsu profile vs others. 2” cross bars better for my needs than some others which are 3” a few taps were short, and one of the large fender washers rusted in 1 year. In socal.
Suspension/ Tires / Wheels / Drivetrain
Throttle Response Aftermarket
• Brand: Pedal Commander
• From: Amazon
• My Rating: 10/10
• Would I buy again? Yes
• Comments: city 2 setting. Game changer
Suspension
• Brand: Bilstein 6112/5160 @ 2.75”/2.0” height + SPC UCAs
• From: Bilstein and OME, via 88Rotors in LA
• My Rating: 10/10
• Would I buy again? Yes!
• Comments: Really like the balance of city/off-road. Was XREAS which honestly was not bad. Super plush on washboards.
Tires and Wheels
• Brand: Icon vector 6, Toyo AT3 P285/70R17
• From: Icon, Toyo via 88Rotors in LA
• My Rating: 10/10
• Would I buy again? Yes
• Comments: quiet, combo same weight as stock. Required fender liner mod, mud flap delete, and for me a BMC. I think I could have pushed the caster forward and avoided a BMC but, now any idiot can do an alignment without worry.
Attachments
808_702_4Runner
New member
How did you swap the bumper? I'd like to do that with my unlimited
