Hey guys sorry for not getting back to this thread earlier, works' been busy. I just recalculated the above numbers and 6% is a little optimistic, I actually came out to 5% increase over stock diameter. This is how I got it.
TireRack lists my stock 265/70r16 AT20's as having a diameter of 30.6"
30.6*3.14=96.08" circumference
TireRack lists my new 255/75r17 GYSA's as having a diameter of 32.1"
32.1*3.14=100.79" circumference
This means a difference of 4.71" over stock.
4.71/96.08=.049 or 4.9% increase from stock diameter.
If you carryover this correction to my road trip my corrected mileage is 4220.65
4220.65 miles / 222.96 gallons = 18.93 mpg corrected.
I can now comment on the remainder of the trip as well, however not in decimal point detail. I ended up hauling 3200 lbs approx 1600mi in my V6. When I originally picked the trailer up and was towing it home empty I did a little experimenting and found a huge difference in gas mileage simply from drag at 60, 65, and 70 mph. The difference from 60-65 was minimal, maybe 2 mpg. From 65-70 though, there was an ADDITIONAL 5 mpg drop, down to around 12. I ended up towing the rest of the trip around 65 and average out in the 14-16 range depending on how many hills each tank encountered.
I chose to go with a 255/75r17 tire because a) they were very inexpensive for a well reviewed a/t tire b) were lighter than a 265 c) have less rolling and wind resistance than a 265 while being a little taller overall d) actually look really good on the vehicle. I was worried about the pizza cutter look but that is not the case at all and the offset provided by the backspacing on the new wheels pushes the whole wheel/tire assembly out flush with the wheel well. Also, the only rubbing was on the front mudflaps and it was an easy fix.