LTDSC Build Thread

shit photo i know but you get to see the grille better from a distance. Really happy with it.

11614552113_4fe85c4962_b.jpg
 
installed my SpeedoHealer today. Was actually extremely easy and its dialed in to 100% perfect via GPS miles/MPH. Im excited to see the change in miles per tank and actually not really be getting 11mpg like i've been tracking this whole time. Its also very easy to adjust and i put it in a hidden but easy to grab location for when needed. I ahad to adjust it to +7.1% for my 265/70/17s. I plan to eventually go 285s or bigger when these are done so this will help once again.

11845593845_6d43096e22_b.jpg


11845597325_a003c44b4c_b.jpg
 
I haven't heard of that one. Did you order the universal one? Where from/how much?? Details, please!!!

Its very easy install, i was actually shocked although its a little nerve wracking to cut the OEM speedometer wire.

If you remove the gauges and unscrew the plugs its the left plug and silver wire with red stripe. I cut it half way down to get a good connection on it then dropped some solder in there and taped it up. I tapped into the ignition fuse for the power as well as ran the ground to secure in the lower kick panel.

I bought the universal wiring harness Speedohealer and didnt bother with the "top speed" plug as i dont really care.

Amazon.com: Speedohealer Calibrator V4.0 Universal I: Automotive

$116.00 well worth every penny.
 
re-installed my rear shocks after the rebuild. So far im going to leave them at 200PSI as they dont seem to be too bad but i need to go out and test them more to really tune them in. Just happy to have them back and get rid of these terrible shocks i ran in the meantime.

12040006095_834c03a1d2_b.jpg


I also really like these new clamps. A lot cleaner looking and hidden.
 
since my driver side headlight was replaced in my stupid fender bender in Late 2012. My passenger headlight has been original and was yellowing a LOT. It really threw off the looks because the driver side was so clear.

12213673715_751e56edf3_c.jpg


Im planning on doing the 06 headlights and the filler plates sometime later this year with my sport hood im going to be doing as well. But for now, itll look awesome.

If anyone else needs them Amazon has them on sale for $53 shipped.
 
since my driver side headlight was replaced in my stupid fender bender in Late 2012. My passenger headlight has been original and was yellowing a LOT. It really threw off the looks because the driver side was so clear.

12213673715_751e56edf3_c.jpg


Im planning on doing the 06 headlights and the filler plates sometime later this year with my sport hood im going to be doing as well. But for now, itll look awesome.

If anyone else needs them Amazon has them on sale for $53 shipped.

Mine are still great, but for that price? It almost warrants a clickity click!!!:rockon:
 
since my driver side headlight was replaced in my stupid fender bender in Late 2012. My passenger headlight has been original and was yellowing a LOT. It really threw off the looks because the driver side was so clear.

12213673715_751e56edf3_c.jpg


Im planning on doing the 06 headlights and the filler plates sometime later this year with my sport hood im going to be doing as well. But for now, itll look awesome.

If anyone else needs them Amazon has them on sale for $53 shipped.

Wow, thats a steal. Link?

EDIT: Found them, shouldve just searched before posting haha
 
i love my STTs but these were a great deal and i like the AT2s a lot.Hopefully i dont miss the mud terrain look.

Awesome, even better if you got a deal on them. Honestly, I'm guessing you'll still miss the MT look every now and then...I do. However, I have yet to regret making the swap. For an AT, they look great. Plus, you'll love the quieter/smoother ride.
 
If Toyo made them in 275's I would have purchased them. Since they don't, I am going with BFG AT's. Many folks out here in the desert say both are really good.
 
Awesome, even better if you got a deal on them. Honestly, I'm guessing you'll still miss the MT look every now and then...I do. However, I have yet to regret making the swap. For an AT, they look great. Plus, you'll love the quieter/smoother ride.

im also keeping my spacers so that may change the look. I just ran through your thread to see. Looks awesome though. The rear definitely looks like ill miss it but ill figure it out. I just want to be taller and this will do it.
 
im also keeping my spacers so that may change the look. I just ran through your thread to see. Looks awesome though. The rear definitely looks like ill miss it but ill figure it out. I just want to be taller and this will do it.

True. With your spacers and '05 fenders, they will stick out more. And thanks, I'm happy with it. Its a little more tame looking but makes much more sense for my driving style right now with little/no off-road.

I hear you on wanting to be taller/bigger. Sadly, I gave up on that game a while ago. I just hated being maxed out height-wise w/ 33s and still being shorter than stock (full-size) 4x4s on 32s. Lol. :cry2: Now, I've got my coilovers much lower for the better ride and just don't care. If I want bigger, i'll have bump up to a full-size with 35s.
 
Last edited:
12605334953_400413180d_b.jpg

I discovered this today. its also starting on the passenger front door. Only the passenger side. Ill have to stop by the body shop soon to see what they can do. I know technically it cant be saved, has to be sanded and painted and blended. Im just hoping it wont cost much.
 

Members online

Forum statistics

Threads
278,306
Messages
3,554,046
Members
248,016
Latest member
Advally Service

Trending content

Back
Top