LTDSC Build Thread

[LTDSC]

What is this "snow" stuff you speak of?......lol:becky:

I hear its pretty nasty, thankfully it stays two hours north. I just get nasty fog.

 

[EHNWI]

moved the resi mounts today. I like these a lot better.

Your CVs are looking pretty good. How much lift are you at now? I'm about to go to 3" and am learning more about this stuff.

 

[LTDSC]

Your CVs are looking pretty good. How much lift are you at now? I'm about to go to 3" and am learning more about this stuff.

i believe it is 3"-3.5".

 

[LTDSC]

Added some light for backing up. Makes things a lot nicer.

Two 6" single row LED floods

Odd packaging, i had to make sure no cops were driving by while i was holding these.

 

[Cali4Runnea]

I like those reverse lights, that's a really good idea. That's got to be a big help in the dark.

 

[LTDSC]

I like those reverse light, that's a really good idea. That's got to be a big help in the dark.

its a huge help, the reverse light placement is terrible from a light output aspect.

 

[morphious]

its a huge help, the reverse light placement is terrible from a light output aspect.

I did the same thing with my lights at first, but like you said terrible light output and I didn't like being able to see them from the wheel well. Can yours be seen when looking at the vehicle from the profile?

 

[LTDSC]

I did the same thing with my lights at first, but like you said terrible light output and I didn't like being able to see them from the wheel well. Can yours be seen when looking at the vehicle from the profile?

Not at all, ill get a picture tomorrow from the side. you really have to be low to see them. They're bolted to the frame and the rear bumper comes down over that and to the hitch.

 

[momo.75]

I have the same setup and love it. From the look of your packaging yours came from Mexico.....lol Where did you order yours from? I might need to grab another pair

 

[ebg18t]

Morris - do you remember which color wire in the trailer harness I can tap to trigger my rear backup light? I have a led light I need to install.

 

[LTDSC]

Morris - do you remember which color wire in the trailer harness I can tap to trigger my rear backup light? I have a led light I need to install.

Mine was the red wire in the tail light bundle. I held a test light on each one until it finally lit up with reverse on. Then i grounded it alone so it wouldn't get stuck in a rotating ground.

These came from SoCal. I can PM you the link if you want.

 

[having fun]

Thanks for that night shot on them reverse lights. I've been worried about putting xtra lighting under there due to the off roadding and smashing them up, I can tell I can tuck them way in there now and have sufficient lighting. Now just need to get some work to do all this.

 

[Tayzorz]

Looks awesome man, I'm thinking about doing something similar with my duallys

 

[momo.75]

Morris - do you remember which color wire in the trailer harness I can tap to trigger my rear backup light? I have a led light I need to install.

Sorry, been out of town and not checking my email. I actually tied into the reverse wire of one of my tail lights. I can't remember which wire it was off the top of my head.

 

[zopperman]

Sorry, been out of town and not checking my email. I actually tied into the reverse wire of one of my tail lights. I can't remember which wire it was off the top of my head.

Red with yellow stripe IIRC, at least on my 03.

 

[LTDSC]

side photos for those requesting

 

[LTDSC]

Ordered PT297-35070-AS and PT297-35070-SH, (FJ button and wiring) should have them today or tomorrow. I also unwrapped this gem.

 

[Nyc-Runner]

Great build man! I finally had a chance to run through the whole thing so if you have 50 new likes thats just me haha ,4Runner is looking really good love everything that you've done a lot of great inspirations in there! Great wheel and tire choice they look awesome and look great with the color of your truck. Hey do you not run the BAMF sliders anymore or is that last pic you posted from before you had them?

 

[LTDSC]

Great build man! I finally had a chance to run through the whole thing so if you have 50 new likes thats just me haha ,4Runner is looking really good love everything that you've done a lot of great inspirations in there! Great wheel and tire choice they look awesome and look great with the color of your truck. Hey do you not run the BAMF sliders anymore or is that last pic you posted from before you had them?

I still run them, they're hiding in the shadows in the last side pic. I love them, Jerry was a great guy throughout the process and they've come in handy for steps as well.

 

[t-rex grrr]

Jealous of that light bar! Are you planning on picking up a roof rack from Whinston? Full Length 4th Gen Rack - Whitson Metalworks