wrench.n.wheel
New member
Stoked on this. Thanks for the shots Addison.
Awaiting response from SRQ on pricing.
Magnaflow Overland catback exhaust Group Buy on FB
- Thread starter 4runnerfiend
- Start date
Stoked on this. Thanks for the shots Addison.
Awaiting response from SRQ on pricing.
4runnerfiend
New member
I pm'd you guys the pricing as sometime SRQ can take a bit. They are busy guys. I had already ran sharing this pricing by SRQ for a past inquiry.
[MENTION=174573]wrench.n.wheel[/MENTION]
[MENTION=94050]cdrewferd[/MENTION]
[MENTION=174573]wrench.n.wheel[/MENTION]
[MENTION=94050]cdrewferd[/MENTION]
SRQ-Runner
New member
We are 2 people away from level 3 pricing! As soon as we get those two commitments we can open up the site for orders and get everything rolling with Magnaflow!
Endlessblockades
Senior Member
Sadly, I need that money for my kid's Xmas. I'll be paying full price later on.....:sobbing:
Somebody needs to step up here - the price break at tier 3 is decent.
4runnerfiend
New member
We did it. [MENTION=94050]cdrewferd[/MENTION] sealed the deal.
Formidable
New member
Sweet! When and how can we order?
4runnerfiend
New member
Sent you a PM. it is ordrerd thru the SRQ website and they gave out a code for the discount.
96-02 3rd Gen 4Runner Magnaflow Cat Back Exhaust System
Ordered!
Since it's stainless steel I can just keep it in the box and put in storage, install it a year or two from now so I get the mileage on my gibson Catback Exhaust system since that was a few years ago and starting to show signs of slight rust, definitely not as shiny as the magnaflow
Since it's stainless steel I can just keep it in the box and put in storage, install it a year or two from now so I get the mileage on my gibson Catback Exhaust system since that was a few years ago and starting to show signs of slight rust, definitely not as shiny as the magnaflow
rickashay
New member
Now that's I've had it on for a couple days.... As mentioned I have the longer resonator tube on, which is the "quieter" way to set this up. I've ran a few exhausts before (Magnaflow, Borla, TRD, etc) and I say it is definitely "moderate" for sound level. I think it's very similar to the TRD exhausts on the 2nd Gen Tacomas and FJ Cruisers (as another reference point). The sound ramps up a fair bit at the 3500-4000RPM mark but is quite reasonable at the 2500 range. I have a manual and at 60MPH, in 5th gear, on flat ground (not under serious engine load) the exhaust is slightly louder than stock. Of course, once you roll into more throttle you do hear it.
IMO a performance exhaust with "zero drone" does not exist. They might get you 90% of the way there but if you can't stand ANY extra noise I would always suggest you stick to a stock exhaust.
If I were to rate the exhaust (short term with only a few days of driving time of mixed city and highway) I would say: (scale of 1-3 with 3 being Very Satisfied)
Build Quality: 3/3
Fitment: 3/3
Sound Quality: 3/3
Drone/Interior Noise: 2/3
Also a quick photo of the exhaust exit that I snapped:
_08I7333.jpg by Addison Rickaby, on Flickr
No problem. I felt it was my duty as being one of the first to get this thing! lol I'll still drop a short video, but won't have it done until next week.
Totally is!
NP. Will pair well with the S/C.
Awesome guys! I'll do an IG post today or tomorrow and hopefully get a couple more people in the GB. Thanks SRQ for running this! It's also pretty rad that a fellow 3rd Gen member actually was the head engineer for this. Good community here!
Formidable
New member
Absolutely agree and thanks again for the review! The helmholtz resonator doesn’t eliminate all drone, just meant to address the problem areas to some extent. As long as it’s tolerable on long drives that’s the main thing! Can always add another resonator later thanks to the slip on design!
Now that's I've had it on for a couple days.... As mentioned I have the longer resonator tube on, which is the "quieter" way to set this up. I've ran a few exhausts before (Magnaflow, Borla, TRD, etc) and I say it is definitely "moderate" for sound level. I think it's very similar to the TRD exhausts on the 2nd Gen Tacomas and FJ Cruisers (as another reference point). The sound ramps up a fair bit at the 3500-4000RPM mark but is quite reasonable at the 2500 range. I have a manual and at 60MPH, in 5th gear, on flat ground (not under serious engine load) the exhaust is slightly louder than stock. Of course, once you roll into more throttle you do hear it.
IMO a performance exhaust with "zero drone" does not exist. They might get you 90% of the way there but if you can't stand ANY extra noise I would always suggest you stick to a stock exhaust.
If I were to rate the exhaust (short term with only a few days of driving time of mixed city and highway) I would say: (scale of 1-3 with 3 being Very Satisfied)
Build Quality: 3/3
Fitment: 3/3
Sound Quality: 3/3
Drone/Interior Noise: 2/3
Also a quick photo of the exhaust exit that I snapped:
_08I7333.jpg by Addison Rickaby, on Flickr
No problem. I felt it was my duty as being one of the first to get this thing! lol I'll still drop a short video, but won't have it done until next week.
Totally is!
NP. Will pair well with the S/C.
Awesome guys! I'll do an IG post today or tomorrow and hopefully get a couple more people in the GB. Thanks SRQ for running this! It's also pretty rad that a fellow 3rd Gen member actually was the head engineer for this. Good community here!
Formidable
New member
Ordered! Thanks again guys!
Dom8706
New member
Waiting for my code also! Excited!
4runnerfiend
New member
SRQ code
this information was made public on Facebook so I figure it's ok to just share it.
Per SRQ see below:
We have reached level 3 which means ordering is now live!
The discount code on the website is “MGB” to get the group buy discount! Free shipping too! You can check out how you wish with CC, PayPal, or Affirm payments.
96-02 3rd Gen 4Runner Magnaflow Cat Back Exhaust System
[MENTION=394904]Fiffa[/MENTION]
[MENTION=482822]Dom8706[/MENTION]
[MENTION=94050]cdrewferd[/MENTION]
this information was made public on Facebook so I figure it's ok to just share it.
Per SRQ see below:
We have reached level 3 which means ordering is now live!
The discount code on the website is “MGB” to get the group buy discount! Free shipping too! You can check out how you wish with CC, PayPal, or Affirm payments.
96-02 3rd Gen 4Runner Magnaflow Cat Back Exhaust System
[MENTION=394904]Fiffa[/MENTION]
[MENTION=482822]Dom8706[/MENTION]
[MENTION=94050]cdrewferd[/MENTION]
SRQ-Runner
New member
Thanks for sharing this over here!
Fiffa
Member
ORDERED! Thanks a ton for including us non-socialites!:rockon:
