Magnetic Grey 4Runners! Lets see them!

[Moose.and.Me]

Sent from my iPhone using Tapatalk

 

[jman41]

jman, your rig looks really good. I like that stance. What lift and tires are you running?


Sent from my iPhone using Tapatalk

Thanks!

I kept it fairly simple with Bilstein 5100s on all four corners (front set to 2.5"), Toytec 1.5" spacer in the rear, SPC UCA.

My tires are BF Goodrich 285/70 on 17x9 et1 Rotiform SIX-OR wheels.

With this setup, I haven't had to trim anything and have zero rubbing on and off road.

 

[T4R_SH]

Finally got everything installed last week and couldn’t be happier!

 

[wtaggart]

That's Elmer. 2015 SR5 Premium. Toytec level and TRD wheels ko2 tires


Sent from my iPhone using Tapatalk

 

[pmostaghim]

Some Mag Grey Love - From XC Road Trip 2017!

Hey everyone - here are some pics (mainly iPhone) from our recent adventures across the US. Happy to have done it in a Mag Grey T4R - thought it best to share here! :wink2:

--

Setup:

- SR5P on 275 KO2's Load C
- Frontrunner Slimline II Rack
- Tepui Kukenam Sky 3
- Frontrunner 15.9gal Water Tank + Hose Kit
- Maxtrax (2)
- The Water Port (not seen / mounted it later)
- DeLorme/Garmin InReach Explorer

 

[pmostaghim]

Some *MORE* Mag Grey Love - From XC Road Trip 2017!

Having some trouble loading the photos onto T4R. More photos are available at this link:

https://www.pmostaghim.com/travel#/xc-road-trip-2017/

sorry guys!

- Pasha

 

[Run4TheWoods!]

 

[TrijiCog]

I have searched online and here and I hope someone can give me a definitive answer.

I have a 2018 Magnetic Gray TRD ORP and the silver lower valances are pegging my OCD,like why would Toyota do this ?

So I need,not want,to change this.

Can I use a MGM SR5 lower valance,if so,where can I get it ? I have searched and searched OEM Toyota parts and I can't find it.

I would post a picture,but it is bone stock and boring looking compared to everything else in here.

 

[2016 4Runner SR5]

I have searched online and here and I hope someone can give me a definitive answer.

I have a 2018 Magnetic Gray TRD ORP and the silver lower valance is pegging my OCD,like why would Toyota do this ?

So I need,not want,to change this.

Can I use a MGM SR5 lower valance,if so,where can I get it ? I have searched and searched OEM Toyota parts and I can't find it.

I would post a picture,but it is bone stock and boring looking compared to everything else in here.

No such thing as the lower valance on an SR5, it's just the bumper you're looking at. The SR5 doesn't have a valance attached to the bumper at all. Your only factory color options are the silver or black. You could certainly have a body shop paint your silver valance any color you want though.

 

[chaosrob]

A lot of beautiful trucks. MG was my second choice behind cement but since neither was offered on the '18 I had to go to the third. Love seeing all your great rides though and have haunted this thread since it popped up on the page.

 

[TrijiCog]

No such thing as the lower valance on an SR5, it's just the bumper you're looking at. The SR5 doesn't have a valance attached to the bumper at all. Your only factory color options are the silver or black. You could certainly have a body shop paint your silver valance any color you want though.

Thanks,I feel bad...Looking at the SR5 I now see that.

 

[2016 4Runner SR5]

Thanks,I feel bad...Looking at the SR5 I now see that.

No reason to feel bad. I agree with you, the silver looks silly. Think about having the silver wrapped in a matter black vinyl. Looks good IMO

 

[TrijiCog]

No reason to feel bad. I agree with you, the silver looks silly. Think about having the silver wrapped in a matter black vinyl. Looks good IMO

Was thinking that,or have it painted to color match the body..Leaning towards the matte black though.

 

[GearJunkie88]

Was thinking that,or have it painted to color match the body..Leaning towards the matte black though.

Dupli-Color makes Perfect Match paint that comes in Toyota MGM. You could use a can or two of that to spray the valance to match the rest of the truck. After you put a few coats of MGM, finish it off with a couple of coats of clear. I personally think black looks good too (not a fan of the mismatch silver).

 

[2016 4Runner SR5]

Dupli-Color makes Perfect Match paint that comes in Toyota MGM. You could use a can or two of that to spray the valance to match the rest of the truck. After you put a few coats of MGM, finish it off with a couple of coats of clear. I personally think black looks good too (not a fan of the mismatch silver).

I used that to paint my grill emblem on my 2016 Tacoma. Color was way off, not even close. Would look even worse when right up against the original color, contrast would stand out quite a bit.

 

[jman41]

 

[theothereng]

Jman41, that's a sick photo! Here's mine.

 

[Sublimeyota]

Thanks!

I kept it fairly simple with Bilstein 5100s on all four corners (front set to 2.5"), Toytec 1.5" spacer in the rear, SPC UCA.

My tires are BF Goodrich 285/70 on 17x9 et1 Rotiform SIX-OR wheels.

With this setup, I haven't had to trim anything and have zero rubbing on and off road.

Sick shot

 

[jman41]

Jman41, that's a sick photo!

Sick shot

Thanks!!

 

[tjrlcr2k1]

My 2010 MGM was in storage for over 7 years while I was in the Navy stationed in Japan. It has 15,000 miles on it. Picked her up 2 weeks ago and today finished up all the mods. Shrockworks bumper and sliders, RCI aluminum skids, King shocks, 285 Ridge grapplers, and Fuel wheels.

Sent from my SM-G935T using Tapatalk