Magnetic Grey 4Runners! Lets see them!

Yep

Looks good! Im looking at a lift and rack for mine just like this. Is that a Prinsu?

Yes it’s a prinsu 3/4 easy install. Do yourself a favor and order your panels with it. I didn’t and I had to install three panels later. Would have been easier to install when mounting to roof. I have three panels.
 
Fall detail about done.
 

Attachments

  • 1.jpg
    1.jpg
    134.7 KB · Views: 3,113
  • 2.jpg
    2.jpg
    126.1 KB · Views: 3,116
  • 3.jpg
    3.jpg
    128.6 KB · Views: 3,126
Yes that's the Eibachs front and rear. I have lifted 5 Jeeps, and FJ and an Xterra with way more expensive lifts and I've never been happier than I am with the 4R. It rides slightly firmer, but soaks up bumps well. Less nose dive and sway. Oddly it seems to have improved my hood bounce.

I spent $1500 for tires, springs, install and alignment. Ive spent thousands more on my Jeeps for a look and ride I hated.

That looks nice Dallas, did you add any UCA's or LCA's? Would they have a kit that keeps the rake? Do a lot of towing and would need to keep the rake. $1500 including tires? Man you sure know how to find a good deal...lol
 
My 2019 MGM TRD Off Road Premium. The picture was taken shortly after installing Bilstein 6112 up front (set at 1.75") and 1" Bilstein Rear Coil Lift with Bilstein 5160s. Rocking stock size KO2, 265/70r17.
 

Attachments

  • AfterLift copy.jpg
    AfterLift copy.jpg
    79.4 KB · Views: 3,476
My 2019 MGM TRD Off Road Premium. The picture was taken shortly after installing Bilstein 6112 up front (set at 1.75") and 1" Bilstein Rear Coil Lift with Bilstein 5160s. Rocking stock size KO2, 265/70r17.


I love that set up, I just ordered some KO2s, you have any more pics? I’m trying to decide if I want white letters out or in


Sent from my iPhone using Tapatalk
 
I love that set up, I just ordered some KO2s, you have any more pics? I’m trying to decide if I want white letters out or in


Sent from my iPhone using Tapatalk

Thank you. Yea, I'm pretty happy with the setup. Here are a couple more from a recent trip out in the desert, she's definitely a lot more dirty in these pics.
 

Attachments

  • Desert2.JPG
    Desert2.JPG
    107.6 KB · Views: 2,615
  • Desert.jpg
    Desert.jpg
    51.7 KB · Views: 2,570
What roof rack is that?

It's a Rhino Rack, it's their 60"x49" Pioneer Platform. It's designed to be used with the 4Runners stock rail system using Rhino Rack's Vortex SX legs that attach to the factory rails. I like it, it's modular, it's a low profile, and doesn't interfere with my sunroof. I bought the optional full rail system, but have since took it off because I prefer the flatter look. Here's another view.
 

Attachments

  • Desert2.JPG
    Desert2.JPG
    107.6 KB · Views: 2,458
Last edited:
My 2021 TRD ORP -
Victory 4x4 Rack - Has solar panel installed more stuff later
FJ Cruiser rims powder coated
General Grabber AT/x 285/70/17 tires
Ironman 4x4 Stage One Foam Cell Lift kit
Sliders arrive this week
Topo Hood Scoop Decal Added

Round one is finished. Electrical work done including a Group 27 X2 Deep Cycle battery, solar, power for radios, and fridge.

Round II not sure what will be next. Maybe a drawer in the back to mount my fridge too.

Bumpers may get ordered sooner rather than later because lead times are crazy. We will see what "Black Friday" deals are offered.

I am also going to make a cover for the solar panel to protect it as required.

4RunnerDriverProfile-scaled.jpeg


SolarInstall-scaled.jpeg


TopoDecal-scaled.jpeg
 
It's a Rhino Rack, it's their 60"x49" Pioneer Platform. It's designed to be used with the 4Runners stock rail system using Rhino Rack's Vortex SX legs that attach to the factory rails. I like it, it's modular, it's a low profile, and doesn't interfere with my sunroof. I bought the optional full rail system, but have since took it off because I prefer the flatter look. Here's another view.

Thanks Jorge. I’ll have to look into that.
 
thats a great looking setup. i dont know why, but your tires look to be lower profile than factory size tires. i have factory size tires and they seem to look like they have a taller sidewall

Thanks man. Yea, I'm not sure. However, BFGs are known to run small. Also, though I went with a 1" Bilstein lift spring for the rear, I believe I netted more than that. Measurement for the rear; hub to fender is 23.75". When these tires wear out, I will go up to 285s. I'll adjust the front to 2.4" and leave the rear alone because I feel I have plenty of room back there for 285s.
 
I see your location is Tulsa. We moved to California from Tulsa about 3 1/2 years ago. I spend the better part of my adulthood in Tulsa. Small world.

With the exception of being away for college, I’ve lived in Tulsa my entire life.
That’s a nice looking 4R you have. Mine is just 2WD since I don’t do any off-roading, just car camping with my wife.
Had a 1997 4R that I really liked, also 2WD, that I handed down to my daughter. After driving a Honda CR-V for awhile, I just had to have another 4R, so I bought my 2019 last year.
 
With the exception of being away for college, I’ve lived in Tulsa my entire life.
That’s a nice looking 4R you have. Mine is just 2WD since I don’t do any off-roading, just car camping with my wife.
Had a 1997 4R that I really liked, also 2WD, that I handed down to my daughter. After driving a Honda CR-V for awhile, I just had to have another 4R, so I bought my 2019 last year.

I get to spend about a month every year down in Tulsa for work. I can honestly say I’ve always had a blast there, and met some great people too.
 

Members online

No members online now.

Forum statistics

Threads
278,310
Messages
3,554,079
Members
248,016
Latest member
Advally Service

Trending content

Back
Top