Might be purchasing this 3rd gen - need thoughts

[hambob]

If this one checks out just make sure you get it on the highway at at least 120km/h. If there are any issues with the front end they will rear there ugly head there.

Good luck with the 3rg gen hunt

 

[Diesel_Dog]

he is putting in a brand new battery as well as new rear axel seals.

What's going on with the real axel seals? Are they just replacing the seals or are they doing the bearings as well? Usually they should be done together, so you might be looking at doing the seals and bearings if the bearings are the root problem of the leak.

 

[EricHartley]

If this one checks out just make sure you get it on the highway at at least 120km/h. If there are any issues with the front end they will rear there ugly head there.

Good luck with the 3rg gen hunt

Drove it down highway 1, took it to just under 120km/hr and let go of the wheel and was actually surprised how straight it drove. (My old 96 would try to shake the demons out of me when over 100km/hr)


Not to sure if bearings were done when the axel seal was done, but il ask. Thanks for the heads up.