Misfiring codes 2, 4 and 6

[banetranch]

After replacing both head gaskets, belts ect.. check engine light came on with the codes 2,4 and 6 cylinder misfiring. Checked the wires three times to make sure they were connect to the right cylinders.
Fuel injectors are 2 an 4 firing with a sethscope a new injector on number 6.
I am out of ideas and I need to get on the road. Any help I would appreciate it. Thanks

 

[fastolds]

First thoughts are that the wiring to the injectors is not correct. I would double check that first.

Why were the headgaskets replaced to begin with? Was there any issue with the head that required it to be removed?

 

[banetranch]

Was using coolant because cylinder three was leaking in that cylinder but had them both machined.

 

[banetranch]

I'm almost positive the wires are correctly installed bc the harness is so tight they would not reach to any other ones

 

[TheDurk]

I'm almost positive the wires are correctly installed bc the harness is so tight they would not reach to any other ones

Please check again anyway. Just for me. 1-4, 3-6, 5-2.

 

[banetranch]

I checked again hoping it is only a few wires that are off.I'm sad to say that I have them correct

 

[banetranch]

update

Problem was that side was off by three teeth causing the coders.thanks for all your input