My 98 Limited
- Thread starter busmup808
- Start date
sogoood
New member
97Run-Man
New member
Just got done doing a fitting test
Sent from my iPhone using Tapatalk
What thickness is the drawer? I’m gonna guess it’s aluminum and whoever welded did a nice job.
Sent from my iPhone using Tapatalk
busmup808
New member
Last edited:
busmup808
New member
I know. I just bit myself in the a$$. I really miss the articulation!
Sent from my iPhone using Tapatalk
busmup808
New member
So my starter was acting up. I went to toyota and bought a rebuild kit. What a nightmare to change this dam thing. Took me 3 hrs just to change this dam starter. My shoulders fell jello and my forearms are scratched up. Just glad it’s done. Going to be way easier when I chop all this IFS off.
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
First off, love your build. I think it’s awesome what you’ve done with your runner. All the different aspects and different cars, really unique
Secondly, how many inches do you make with your current setup with the tundra trd coils, 5100 bilsteins. The lx450 coils and the cruiser ome?
Secondly, how many inches do you make with your current setup with the tundra trd coils, 5100 bilsteins. The lx450 coils and the cruiser ome?
busmup808
New member
Sell the sway bars and I’m still going to be using the tundra brakes with my straight axle
Sent from my iPhone using Tapatalk
Last edited:
busmup808
New member
It’s 3” in the front. I only have it on the middle perch on the billsteins.
The rear is 4”, but when we go camping and I’m fully loaded it drops to 3”
Sent from my iPhone using Tapatalk
Road Bull
Senior Member
:
Nice. It looks like you could actually stand on top of that if needed. And I can think of a few situations where that might come in handy.
Put the new bumper on. Went with the same company Badland Bumpers. I went with the Flat Top instead of the Bambi Basher
Sent from my iPhone using Tapatalk
Nice. It looks like you could actually stand on top of that if needed. And I can think of a few situations where that might come in handy.
busmup808
New member
Gude job [MENTION=119532]Road Bull[/MENTION]. That is exactly why I chose to go with the Flat Top. I also just sprayed sum rubber Flex Seal on the top so I don’t go slipping off when standing on it. I also chose it because when I would work on my motor, the bars were in the way.
Sent from my iPhone using Tapatalk
Can't believe I missed your retrofit! Just noticed it with the front bumper pic.
Do you remember the specifics of these projectors/shrouds? They're the perfect size for the Tacoma headlights.
Almost done
Sent from my iPhone using Tapatalk
Do you remember the specifics of these projectors/shrouds? They're the perfect size for the Tacoma headlights.
busmup808
New member
Last edited:
Similar threads
