My Runner is finally standing tall!

[drabbits]

Almost done with the lift. As it sits with no rear weight....
Rears 25.5" Rear should come down a little with spare tire and stuff I carry.
Fronts 24"

Fronts are Toytec Coils with Tundra Bilsteins on (edited 3/8/13, 2nd notch, not 3rd)
Rear LC FJ80 7.5 / 8 wraps (19" / 19.25")

Can't wait to upgrade to 17"!!!!!

And to think I was going to delete this If you get it you get it.......

 

[Hepar]

Looks good! Really like the rack too. Nice work.

 

[downpour11]

Looks sick!!

 

[TegoXR]

285's would look good on that, or try 305's! Love the stance!

 

[audiness]

looks nice. I bet it was a ***** getting those front coils lined up with the lower shock mounting bolt!

 

[blcktpgsr]

Didn't notice the rack too till Hepar mentioned...is that Gobi? Now slap on some 37's on that monster...kidding aside, what size are you upgrading to?

 

[drabbits]

looks nice. I bet it was a ***** getting those front coils lined up with the lower shock mounting bolt!

It use to be a **** until I found this. check this link out, the one thing I add to this method is that you must losen the bottom control arm bolts, its like night and day.

OME Install - no spring compressor - Toyota 120 Platforms Forum

works awesome, I'll never again use those damn scary compressors.

 

[ChildrenOfBodom]

I get it... my iPhone 5 does the same thing. :wtf:

 

[drabbits]

Didn't notice the rack too till Hepar mentioned...is that Gobi? Now slap on some 37's on that monster...kidding aside, what size are you upgrading to?

aw, you like the rack do you? that's cool coming from the "blcktpgsr brothers":bounce:
That is my faux Gobi, v.1.0, v.2.0 is in the making. actually planning on listing this one for sale soon. its gonna be cheap!!
37's!!!???? like these?

I'm going 285/70/17 Duratrac's or BFG Mud
Need to start building sliders soon, as it sits now my lady can't get in. :clap2:

 

[4Running Daily]

I'm wondering what your center of hub to wheel well measurements are with the Toytec Superflex coils.

Got any measurements?

 

[S Brake]

Your roof rack looks great, I'd love to get one like it one of these days.

 

[Dinabox]

When you say Toytec fronts are you referring to the toytec/eibachs? If so the tundra struts on the very bottom notch will give 3 inches, the 3rd notch maybe 4.5 or more. If you're on the 3rd notch you're cv's hate you badly and I bet it rides stiff as all hell. I have the same coils on the first notch with no weight up front and it's stiff but I like it, I can't even imagine 2 more notches. I'd love to see a shot of your cv angles if you're truly on the 3rd notch.

 

[Kanger328]

Congrats!

 

[Dinabox]

Looks really good, I'd just love to get your impressions on the ride. And pics of your cv angles

 

[drabbits]

When you say Toytec fronts are you referring to the toytec/eibachs? If so the tundra struts on the very bottom notch will give 3 inches, the 3rd notch maybe 4.5 or more. If you're on the 3rd notch you're cv's hate you badly and I bet it rides stiff as all hell. I have the same coils on the first notch with no weight up front and it's stiff but I like it, I can't even imagine 2 more notches. I'd love to see a shot of your cv angles if you're truly on the 3rd notch.

Dina you're right, I don't know why I thought they where on the 3rd notch, I'm blaming the beers and the stress of having to curb it with idiots driving by at 60 mph. It was too stiff with very little shock travel on the 2nd notch, it feels a lot better now on the first notch and sits at 3".
I'm editing and correcting any misleading post I have left. :embarassed:
Toytec's I'm using are the toytec / eibachs up front.

 

[smkd13]

now that your on the first notch what is your hub to fender? and looks killer man. love the roof rack.

 

[TRDteen]

those tires look tiny tiny tiny now! Overall, it looks very nice!

 

[absalom]

Looking good! Time for 33's and spacers And gears. And locker(s). And body lift. Etc.

 

[Shibby!]

And body lift.

Oh GOD!!!

WHY!?!

 

[absalom]

Oh GOD!!!

WHY!?!

To clear 33's? You do know like more then half the build threads use a body lift, right? Lol. A 1" body lift will do wonders to reduce rubbing under compression.