Need Cam Bolts and Sleeves? - OEM Part #s

[blackfc3s]

Basically I tried to replace my lower control arms this morning and have fused cam sleeves in the bushings. dammit.

So I started to price OEM cam sleeves and bolts. Prices are from Village Toyota. Part numbers are based upon a 2005 model year, but shouldn't matter.

Sharing the love.

Front Front
Part Number: 90119-14120
Quantity:2
Price each: $6.02 Price per quantity: $12.04

Part Number: 48409-60020
Quantity:2
Price each: $16.12 Price per quantity: $32.24

Part Number: 48452-35020
Quantity:2
Price each: $17.15 Price per quantity: $34.30

Front Front Total: $78.58

Front Rear
Part Number: 48190-60020
Quantity:2
Price each: $12.67 Price per quantity: $25.34

Part Number: 48198-60011
Quantity:2
Price each: $12.20 Price per quantity: $24.40

Part Number: 90179-14069
Quantity:2
Price each: $1.25 Price per quantity: $2.50

Front Rear Total: $52.24

Total: $130.82

Annnnnnnd all this bullshit could have been avoided if Toyota anti-seized these bolts from the factory.

I would have gotten Moog, but fit and finish is still questionable via the internet forums. Not sure if they have fixed the fitment issue.

 

[BlackWorksInc]

It does seem odd that they didn't at the very least teflon coat the sleeves or something...

Be careful about getting anti-seize on the threads when you install them, you don't want to change the torque value.

 

[nicheel8]

Did you install OEM or aftermarket lower control arms?

 

[blackfc3s]

Did you install OEM or aftermarket lower control arms?

I haven't installed them yet with the cam sleeves fused to the bushings. However, I bought mevotech control arms from Rockauto. They look good, but only time will tell.

I am keeping my originals to rebuild with Energy suspension bushings and moog ball joints when I have more time.

 

[NJshadow93]

I used the SPC cam bolt kit and have no issues. Got them from Toytec.

 

[Ultarnr75]

Basically I tried to replace my lower control arms this morning and have fused cam sleeves in the bushings. dammit.

So I started to price OEM cam sleeves and bolts. Prices are from Village Toyota. Part numbers are based upon a 2005 model year, but shouldn't matter.

Sharing the love.

Front Front
Part Number: 90119-14120
Quantity:2
Price each: $6.02 Price per quantity: $12.04

Part Number: 48409-60020
Quantity:2
Price each: $16.12 Price per quantity: $32.24

Part Number: 48452-35020
Quantity:2
Price each: $17.15 Price per quantity: $34.30

Front Front Total: $78.58

Front Rear
Part Number: 48190-60020
Quantity:2
Price each: $12.67 Price per quantity: $25.34

Part Number: 48198-60011
Quantity:2
Price each: $12.20 Price per quantity: $24.40

Part Number: 90179-14069
Quantity:2
Price each: $1.25 Price per quantity: $2.50

Front Rear Total: $52.24

Total: $130.82

Annnnnnnd all this bullshit could have been avoided if Toyota anti-seized these bolts from the factory.

I would have gotten Moog, but fit and finish is still questionable via the internet forums. Not sure if they have fixed the fitment issue.

I have the same issue and will be ordering all the bolts for the controll arm.

The question that i have, even with having to sawzall arms off... couldnt the cam adjust plate $24 for pair and the front toe adjust plate 37$ a pair be reused?

 

[DMV4runner]

I have the same issue and will be ordering all the bolts for the controll arm.

The question that i have, even with having to sawzall arms off... couldnt the cam adjust plate $24 for pair and the front toe adjust plate 37$ a pair be reused?

When you get ready to tackle this, shoot me a pm if you would like some free help. If I'm free, I can give you a hand. I'm right up the road.
I haven't done this before and mine are seized also. So helping you, will give me some needed experience to tackle mine.

William