NEW Expedition Series Lower Control Arms from TOTAL CHAOS
- Thread starter TOTAL CHAOS
- Start date
canadian bum
New member
Check these out if you live in an area that is hard on uniballs.
Total Choas Upper A-arm Uniball Upgrade
What shocks are available for the 5th gen 4R in that diameter?
jasxn
Member
I know Kings came out with a 3.0 for the Tundra and Tacoma
honda250xtitan
New member
You guys want race truck parts but don't want race truck maintenance?:hurt:
SDHQ (in arizona) prolly will.
[MENTION=236676]TOTAL CHAOS[/MENTION] do you have a recommended online dealer outside of California. I want to try to avoid that ~9.75% sales tax
I'm ready for these suckers.
SDHQ (in arizona) prolly will.
VancouverRunner
New member
When you say these are KDSS compatible does that mean the LCA has mounts for the sway bar bracket?
TOTAL CHAOS
Member
TOTAL CHAOS
Member
[MENTION=236676]TOTAL CHAOS[/MENTION] do you have a recommended online dealer outside of California. I want to try to avoid that ~9.75% sales tax
I'm ready for these suckers.
We don't have a list of what dealers have these on their site right now. Metal Tech 4x4 is a dealer of ours in Oregon. Give them a ring if the arms aren't listed online
Off Road Parts & Accessories | Metal Tech 4x4
TOTAL CHAOS
Member
Correct! The KDSS compatible models have the sway bar brackets on the lower arms.
Expedition Series - KDSS Lower Control Arm - Single Shock
Expedition Series - KDSS Lower Control Arm - Dual Shock
TOTAL CHAOS
Member
Just as my LCA bushing are showing wear...
:tea:
Let us know when you're ready to upgrade
Bumbo
New member
Even if there isn't a formal sku for it, most vendors can make any shock in a custom length.
I would love a Fox 3.0 with a DSC adjuster for both high and low speed compression. Personally I would explore that route for myself before I went with King.
It would be expensive, but still cheaper than adding a secondary bypass in a 2.5 configuration which starts to enter the overkill for my needs area.
TOTAL CHAOS
Member
CAMP CHAOS at Overland Expo West
Stop by CAMP CHAOS at Overland Expo West for some special CC stickers and to see our Expedition Series LCAs in person.
We'll be in booths P11 / P21 near Baja Designs and SDHQ. Come check out our new project build and other goodies
5/17-5/19
See you there!!!
Ways to Attend WEST — Overland Expo
TOTAL CHAOS
TOTAL CHAOS FABRICATION
Stop by CAMP CHAOS at Overland Expo West for some special CC stickers and to see our Expedition Series LCAs in person.
We'll be in booths P11 / P21 near Baja Designs and SDHQ. Come check out our new project build and other goodies
5/17-5/19
See you there!!!
Ways to Attend WEST — Overland Expo
TOTAL CHAOS
TOTAL CHAOS FABRICATION
Attachments
canadian bum
New member
Do you have side by side with tape measure differences of how much of an improvement there is in ground clearance?
TOTAL CHAOS
Member
Having just slopped a bunch of new grease all over a set of these, then gently manipulating them into place, I can a test to their sexinessimp:
:dancin:
TOTAL CHAOS
TOTAL CHAOS FABRICATION
TOTAL CHAOS
Member
We don't have any side-by-side ground clearance comparisons showing the Standard, Race, and Expedition Series. If we find a couple of vehicles at similar ride height we can definitely get a few pics and measurements
TOTAL CHAOS
TOTAL CHAOS FABRICATION
TOTAL CHAOS
Member
Princess is rocking our Expedition Series Lower Control Arms!
Click the photos below for more info on these LCAs
Click the photos below for more info on these LCAs
TOTAL CHAOS
Member
Comment below if you have any questions about our Expedition Series Lowers!
Want to check them out in person? Stop by Rocky Mountain Overland Rally in Gunnison, CO 8/1-8/4
TOTAL CHAOS
TOTAL CHAOS FABRICATION
Want to check them out in person? Stop by Rocky Mountain Overland Rally in Gunnison, CO 8/1-8/4
TOTAL CHAOS
TOTAL CHAOS FABRICATION
