Parting 1998 4Runner V6 5speed Anthracite Marysville, WA

[DeathCougar]

Shipping is probably cost prohibitive, but how much do you think those front seats would cost to ship? ( to 84010, Bountiful Utah )

Thanks

Also could be possibly interested in the rear seat headrests...

Front seats are sold

Rear headrests $25/ea

 

[Kirk_B]

Are both of the front turn signal bulb sockets with wiring intact? If so, how much shipped to 89074?

 

[DeathCougar]

Are both of the front turn signal bulb sockets with wiring intact? If so, how much shipped to 89074?

[MENTION=98560]Kirk_B[/MENTION] sorry, no they are not

 

[Toyotadude88]

Could I please get a price for the 5spd transmission and transfer case plus approximate shipping cost to 95628
?

Thank you

 

[DeathCougar]

Could I please get a price for the 5spd transmission and transfer case plus approximate shipping cost to 95628
?

Thank you

Trans/tcase $200

Shipping you will have to handle the logistics on your own. I don't have a forklift, and it's too heavy to go FedEx

 

[DeathCougar]

Bumping! Tons left on this one!

 

[ChillBud]

Hi, am looking for the following for my 98 SR5 4WD AT:

- lift gate preferably in Desert Dune
- driver's side fender preferably in Desert Dune
- shifter surround (aka console upper panel)
- sun visors in oak color
- steering wheel

If you have any of these available, it would be great to get a price including shipping. I live in NY state in the 12430 zip code.

Thanks!

 

[DeathCougar]

Hi, am looking for the following for my 98 SR5 4WD AT:

- lift gate preferably in Desert Dune
- driver's side fender preferably in Desert Dune
- shifter surround (aka console upper panel)
- sun visors in oak color
- steering wheel

If you have any of these available, it would be great to get a price including shipping. I live in NY state in the 12430 zip code.

Thanks!

[MENTION=129665]ChillBud[/MENTION]

1. Can't ship lift gate or Fender....too large and sell fast locally so not worth the hassle
2. Shifter surround....you also said upper panel, do you need the surround around the actual shifter? I have them either way
3. Sunvisors: $25+ship
4. Steering wheel: $75+ship (4 spoke, black)

 

[ChillBud]

[MENTION=129665]ChillBud[/MENTION]

1. Can't ship lift gate or Fender....too large and sell fast locally so not worth the hassle
2. Shifter surround....you also said upper panel, do you need the surround around the actual shifter? I have them either way
3. Sunvisors: $25+ship
4. Steering wheel: $75+ship (4 spoke, black)

Thanks for the quick response. For the shifter thing, I'm pretty sure the official name is "console - upper panel". I need the black plastic piece of the console that surrounds the automatic shift and the 4WD shift. Would you be able to send a pic of that along with the sunvisors and steering wheel? It would be great to see their condition.

Thanks, ChillBud

 

[hambone130]

Hi, I need the small metal shield that goes between the rear cat and the frame. It's curved and covers the hoses for the rear heater. Also a 16in spare steel rim. Both of these parts rust heavily in the northeast.

06498

 

[RussToy]

Hello Josh,

I saw that you already sold the front seats...I'm Still looking for the plastic guard cover that is on the left side of the front passengers seat. I need it in the "oak" color. This one would have been perfect! Could you please keep an eye out for me...thank you Sir

- Russel

 

[DeathCougar]

Thanks for the quick response. For the shifter thing, I'm pretty sure the official name is "console - upper panel". I need the black plastic piece of the console that surrounds the automatic shift and the 4WD shift. Would you be able to send a pic of that along with the sunvisors and steering wheel? It would be great to see their condition.

Thanks, ChillBud

[MENTION=129665]ChillBud[/MENTION] I will try and get pictures. Just so we are clear, you need a 4 spoke black wheel correct? ANd are your visors half vinyl/half cloth, or full cloth?

Hi, I need the small metal shield that goes between the rear cat and the frame. It's curved and covers the hoses for the rear heater. Also a 16in spare steel rim. Both of these parts rust heavily in the northeast.

06498

[MENTION=61541]Hambone[/MENTION] Do you have a picture of the shield? And you say rear cat....do you have the Dual round cat setup?

Hello Josh,

I saw that you already sold the front seats...I'm Still looking for the plastic guard cover that is on the left side of the front passengers seat. I need it in the "oak" color. This one would have been perfect! Could you please keep an eye out for me...thank you Sir

- Russel

[MENTION=72272]RussToy[/MENTION] will do, although I never remove these off good seats so might be a few years waiting for a trashed seat!

 

[RussToy]

[MENTION=72272]RussToy[/MENTION] will do, although I never remove these off good seats so might be a few years waiting for a trashed seat!

Wow...ok, that totally sucks! How much do you charge for a whole seat? If reasonable...I'll buy the whole seat and you can send me the part and I'll donate the seat to you !! If too much...I guess I'll be waiting?!?

Thank you

- Russel

 

[ConfederateHalf]

98 4Runner - Passenger Side Running Board Available?

I saw where you stated that it is impossible to successfully remove the end caps from the OEM running boards for the 1998 4Runner you are parting out. This being the case, I would be interested in the entire passenger side running board (including attached end caps). Could you please let me know if it is available and how much you want for it? Thanks!

 

[DeathCougar]

I saw where you stated that it is impossible to successfully remove the end caps from the OEM running boards for the 1998 4Runner you are parting out. This being the case, I would be interested in the entire passenger side running board (including attached end caps). Could you please let me know if it is available and how much you want for it? Thanks!

[MENTION=129972]ConfederateHalf[/MENTION]

I would only sell this locally, since it would be nearly impossible to ship without FedEx destroying it. I've tried it, I won't ship large items anymore. You can still get the end caps from Toyota for cheap. Last I checked the entire set was under $100. And if they tell you they are only part of the running board, they are WRONG. They can be purchased separate. I've seen them!

 

[DeathCougar]

Bump, tons of parts left!

 

[North]

Looking for the rubber weatherstrip that surrounds the lift gate opening, assuming its' not a pain to remove without damage.

 

[DeathCougar]

Looking for the rubber weatherstrip that surrounds the lift gate opening, assuming its' not a pain to remove without damage.

I have this $35 shipped in nice shape

PayPal [email protected]

Thanks!

 

[junzhang10]

Interest in the running board. I am in seattle.

 

[UnderFire]

Mainly out of curiosity, what are you looking to get for the Yakima bars and towers?