Pics of 275/70 tires with 3" Lift?

[Raoul_Duke]

I'm currently running BFG KO2s, size 275/70/17 with Bilsteins set at 1.75" up front and a 1" cornfed spacer in the rear, but I'm thinking of installing OME springs all the way around for what I understand will be about 2.5-3.0" of lift. Before I pull the trigger, I'd like to see some pics of trucks with a similar configuration to see how this size tire looks with this much lift. Post up if you have 'em, please. Thanks.

 

[codyHTX]

[MENTION=154613]Raoul_Duke[/MENTION]
Hayden had a toytec 3"/2" with 275/70's for a short time (post 254), but then went up to 285/70 (post 264 shows a 275 - 285 comparison)

https://www.toyota-4runner.org/2791773-post254.html
https://www.toyota-4runner.org/2808030-post264.html

 

[<3s4PLAY]

Here's my 4Runner running Dobinsons 3"/2" lift on 275 BFG K02's

 

[Skizza20]

I think this is exactly what I'm going to do. I was torn between 16'' and 17'' wheels, but am leaning towards 17s.

 

[Skizza20]

And I also have a really similarly colored 4R, so I'm digging the inspiration!

 

[SpeedyKevin]

I think this is exactly what I'm going to do. I was torn between 16'' and 17'' wheels, but am leaning towards 17s.

I believe 16 wheels may be an issue with 5th gens due to the brake size. Not sure though... I'll see if I can find that source

 

[TRD PANTHER]

TRD Pro with Cornfed 1.5/1” spacer lift for a total of 2.5”/1” with 275’s.

 

[manofsteele2003]

I'm currently running BFG KO2s, size 275/70/17 with Bilsteins set at 1.75" up front and a 1" cornfed spacer in the rear, but I'm thinking of installing OME springs all the way around for what I understand will be about 2.5-3.0" of lift. Before I pull the trigger, I'd like to see some pics of trucks with a similar configuration to see how this size tire looks with this much lift. Post up if you have 'em, please. Thanks.

Can you post pics of your setup? I'm currently running the same height with 6112s but w/ 265s. Thinking of upping to 275s but I don't want a stuffed wheel well

 

[Raoul_Duke]

Can you post pics of your setup? I'm currently running the same height with 6112s but w/ 265s. Thinking of upping to 275s but I don't want a stuffed wheel well

Here you go. Personally, I don’t think the wheel wells look stuffed at all with this configuration, though I thought it did before I got the lift.

 

[manofsteele2003]

Looks great thank you.

 

[Tyler_T4R]

Here you go. Personally, I don’t think the wheel wells look stuffed at all with this configuration, though I thought it did before I got the lift.

How is your rubbing with that setup? Any trimming needed? Looks great.

 

[Raoul_Duke]

How is your rubbing with that setup? Any trimming needed? Looks great.

Thanks. No trimming needed, and no rubbing at all.