Post your LIFTED pix here!

[littlezavasaurus]

45psi. I literally pulled over just to take the picture haahah that would explain the cleanliness of them. When i'm off roading - 15psi

oh shit haha I didn't even realize there was pavement there. It looked like a dirt road to me (too focused looking at your rig haha)

 

[Duke562]

Bilstein 2.5 front and rear also with toytec 2.0

 

[enkrypt3d]

New Nitto Trail Grappler tires installed! Loving it! 285/70/17 amazon free shipping! Cheaper than tire rack or discount tire... really happy with it.

 

[Brooksjpb]

New Nitto Trail Grappler tires installed! Loving it! 285/70/17 amazon free shipping! Cheaper than tire rack or discount tire... really happy with it.

Are you having any rubbing yet? Nice look by the way


Sent from my iPad using Tapatalk

 

[enkrypt3d]

Are you having any rubbing yet? Nice look by the way


Sent from my iPad using Tapatalk

thanks man nearly no rubbing except when I'm at full lock and reversing which doesn't bother me much. I'm amazed at how quiet they are and my wife couldn't tell a difference in ride quality from the OEM Tires which is great :becky:

 

[HazemA]

Hi guys! Checking in with a 2016 T4R SR5P.

 

[Jasalvas]

Hi guys! Checking in with a 2016 T4R SR5P.

Looks great on the 5th notch!


Sent from my iPhone using Tapatalk

 

[HazemA]

Looks great on the 5th notch!


Sent from my iPhone using Tapatalk

Thanks, bud!

 

[islandstyle]

thanks man nearly no rubbing except when I'm at full lock and reversing which doesn't bother me much. I'm amazed at how quiet they are and my wife couldn't tell a difference in ride quality from the OEM Tires which is great :becky:

It will get louder.

 

[KAGE-RANNA]

SPECS:
2016 SR5P
ToyTec Boss 2.5 CO with Total Chaos Uniball CA up front
39.25" in front to bottom of fender
ToyTec RCC2.0 springs and BOSS shocks in rear
40" in rear to bottom of fender
Fuel Trophy with 285/70r17 Nitto Ridge Grappler

 

[KalihiRunner]

SPECS:

2016 SR5P

ToyTec Boss 2.5 CO with Total Chaos Uniball CA up front

39.25" in front to bottom of fender

ToyTec RCC2.0 springs and BOSS shocks in rear

40" in rear to bottom of fender

Fuel Trophy with 285/70r17 Nitto Ridge Grappler

Looks Sweet! Any rubbing issue in the front?


Sent from my iPhone using Tapatalk

 

[KAGE-RANNA]

Looks Sweet! Any rubbing issue in the front?

nope - did the fender liner mod

 

[KalihiRunner]

nope - did the fender liner mod

Trim the front bumper liner?


Sent from my iPhone using Tapatalk

 

[Avalon786]

Hi guys! Checking in with a 2016 T4R SR5P.

That looks great! Stock UCA's? I have the same set up but 3rd notch. Wishing I had done 4th notch at least. But with stock UCA's my alignment is off just on the 3rd, I can't imagine doing the 5th notch...

 

[KAGE-RANNA]

Trim the front bumper liner?

http://www.toyota-4runner.org/5th-gen-t4rs/150779-falls-lift-questions.html#post759604

 

[DKRunner]

SPECS:
2016 SR5P
ToyTec Boss 2.5 CO with Total Chaos Uniball CA up front
39.25" in front to bottom of fender
ToyTec RCC2.0 springs and BOSS shocks in rear
40" in rear to bottom of fender
Fuel Trophy with 285/70r17 Nitto Ridge Grappler

Beautiful. Makes me excited to install the boss kit. Hope the front 2.0 coil overs are off back order soon.

 

[Woodsong]

Lots of great lifted 4runners in this thread!!

 

[SoCalBeachBunny]

1992 on 33's

 

[WhiteLightning]

1992 on 33's

Might be better suited for the "Classic 4Runner" section, not 5th Gen. looks nice tho

 

[SoCalBeachBunny]

Oops!