Post your LIFTED pix here!
- Thread starter B'klyn_Mike
- Start date
when they offer a no sunroof, TE w/a turbo diesel I'm in
:cheers:
AMEN (although I sorta bought one in the meantime...) :bigok:
B'klyn_Mike
New member
:
Badass :thumb3:
RedKnuckles
New member
Factory Springs
Just finished installing Toytec front spacers to level my Limited. It has probably been mentioned somewhere here before, but I was surprised to find that the springs are different on each side. Front Left has 10 coils. Front Right has 8. I do not recall this being the case when I leveled my '08 Urban Runner. Nevertheless, it was a smooth 4 hour install.
Just finished installing Toytec front spacers to level my Limited. It has probably been mentioned somewhere here before, but I was surprised to find that the springs are different on each side. Front Left has 10 coils. Front Right has 8. I do not recall this being the case when I leveled my '08 Urban Runner. Nevertheless, it was a smooth 4 hour install.
chimyz
New member
Pic???
snow&surf
New member
N-fab: Manufacturers of Nerfsteps, Prerunners, Harley Bars & Truck Accessories
unfortunately they only make them for the TE. i want these too :sobbing:
Jesse1983
5th Gen Moderator
Weird since they aren't shown on a te
I AM SAM
New member
Agreed, they must fit since the picture shows them on a SR5.
-N-fabs Wheel 2 Wheel nerf steps have the main bar extend from wheel well opening to wheel well opening for a more finished and complete look.
-N-fabs stainless nerf steps will work with or without a body lift on all models.
-The main bar is positioned high and tight for better aesthetics and so it will hide the exposed frame you can see under the truck.
-Manufactured using .084 wall corrosion protected tubing
-Standard Finish is a Zink base coat with a High Gloss Black Finish Coat for a high quality corrosion protected finish that will
-N-fab also offers any of its products in a custom color matched finish in any color you choose an additional charge.
-N-fabs Wheel 2 Wheel nerf steps have the main bar extend from wheel well opening to wheel well opening for a more finished and complete look.
-N-fabs stainless nerf steps will work with or without a body lift on all models.
-The main bar is positioned high and tight for better aesthetics and so it will hide the exposed frame you can see under the truck.
-Manufactured using .084 wall corrosion protected tubing
-Standard Finish is a Zink base coat with a High Gloss Black Finish Coat for a high quality corrosion protected finish that will
-N-fab also offers any of its products in a custom color matched finish in any color you choose an additional charge.
IIRC, there was a thread a while back (when the N-fab bars were first spotted) that the set on the SR5 was specially made for that "Show"Runner. The ones offered for sale via the web will only fit the TE. I don't know how accurate that post was, but it still seems strange to offer it only for the TE when so many SR5 and Limited owners have expressed an interest in them.
