Off-Camber
New member
They sent me a prepaid label to ship back last week. I put it in the mail Tuesday. Package was delivered to Victory with my camera and the inner camera mount from Victory on Friday.
Rear Bumper with Modular Swingouts NOW AVAILABLE! NEW VIDEO
- Thread starter Victory 4x4
- Start date
They sent me a prepaid label to ship back last week. I put it in the mail Tuesday. Package was delivered to Victory with my camera and the inner camera mount from Victory on Friday.
4R4Trout
Member
Cool. Thanks for the update Brandon. My bumper should be here Thursday.
Victory 4x4
Official Vendor
A new camera mount will ship out today or tomorrow! Thank you for your help! From now on, the camera relocation will come with both styles of the bracket. We will also ship them to those that already ordered and need the older style.
Attachments
Off-Camber
New member
Is that an overlay of new vs old mount pattern or a multi mount pattern?
Victory 4x4
Official Vendor
That is just the mount for the older camera style. It keys right in, so each will get their own mount.
Off-Camber
New member
Ah hah... got it. I see it now.
Mutant138
Banned
Meow I want to see the cans with the ladder and a 285 or 295 mounted.
These are looking pretty good tho.
dktxt4r
New member
I have the ladder on order and should hopefully receive it before the end of the year. I have my 265 mounted now so I'll update with photos once I receive the ladder and get it installed. At least you'll get an idea of what it's going to look like.
dktxt4r
New member
Here's my setup. Once the ladder comes in and I install it, bumper will be done...or so I think. Running 265 70 17 tires and there is about an inch from the dual jerry can holder. These were installed the furthest apart from each other so larger tires may be an issue. I didn't mess with the stock backup camera because I had previously ran wiring for an aftermarket backup camera.
Attachments
Nice man congrats on the rear setup. What aftermarket backup camera/bumper mount did you use? Looks really nice
Sent from my iPhone using Tapatalk
dktxt4r
New member
For the license plate light, I didn't want to tap into stock wiring so I purchase a Curt USCAR 7 pin T harness with 4 pin. This way, I can still use 7 pin or 4 pin from the stock location. I ran the new 4 pin wiring from the harness to the rear passenger side. I then connected the LP light to a quick disconnect 2 pin plug female end and the male end to male end of the 4 pin connector. Brown to red and white to black on the LP light. Taped off the yellow and green wire since it wasn't used. I've had a few drinks and I'm typing this on my phone so I'll post pics to illustrate. Just showing how I did it.
Attachments
dktxt4r
New member
This is what I'm using. Acts as dash and rear cam.
Attachments
4R4Trout
Member
“Nice cans” dk. It looks great with the dual green Jerry’s on there. I just got my bumper this week and the weather is a bit too snowy for the install. Going to have to wait until better weather.
Madmartygan
New member
Hmmm. Any plans for the hi-lift jack carrier? Earlier on in this thread it was confirmed that the jack carrier would work with the dual jerry can set up (post 129). Looking at your pics, I'm trying to figure out where it would go since that is the route I took with mine.
dktxt4r
New member
In all honesty, looking at the pictures of the high lift mount on the Victory website and looking at my setup, I don't see how they would be compatible.
:shrug::shrug::shrug:
agentcross
New member
C4 ladder fits per an Instagram account. Any others?
dktxt4r
New member
Victory 4x4 ladder?
Attachments
macscac
New member
hey Victory,
This may have been answered above and I missed it but I am curious, with this bumper, are we still able to pull the same weight as a stock runner with a stock tow receiver?
I love this bumper and I am really hoping it does not limit any of the rigs towing ability
thank you
This may have been answered above and I missed it but I am curious, with this bumper, are we still able to pull the same weight as a stock runner with a stock tow receiver?
I love this bumper and I am really hoping it does not limit any of the rigs towing ability
thank you
sn_85
Senior Member
Unless they had it tow rated at an independent facility there's no way they're going to answer this one for you. Just way too much liability on their part to claim it can tow stock 5,000 lbs without officially rating it. Eager to hear what they have to say about it.
Similar threads
