• If you plan to post to Classified forums, you must follow these rules, or your post will be deleted.

    1. Thread title must include at a minimum: FS or FT, Item(1st, 2nd, 3rd, 4th or 5th gen), Price and Location. For Example: FS: 4th GEN Carpet Floor Mats - Tan, $50 Denver, CO.
    2. All Threads must contain the following information
      • What is for sale/trade (model, specs, etc.)
      • Condition
      • Price/What you want to trade for
      • Location of item
      • At least one picture of the item for sale or for trade
    3. No "Feeler" Threads - Its either for sale or it isn't.
    4. Moderators lock Classified Threads that have not had any activity in 90 days or when the part is announced SOLD.
    5. Threads not complying with the rules will be deleted without notice.

Rear Recovery Point Sale $90 per pair - Kansas

Status
Not open for further replies.
Inv4drZm said:
We designed it like that so they can be flipped around and used on the other side of the frame, and they are offset to avoid a weld seam that keeps it from mounting 100% flush though that's really just so it looks nicer. It's just to give you different mounting options.

Due to different 4Runner models having different exhaust tailpipes, not to mention aftermarket exhausts, we know the driver's side will fit fine but can't really guarantee the passenger side will fit unless you visually verify that side has clearance from the hot exhaust piping. I wouldn't want the exhaust to get mangled in an off-axis pull and most recoveries can be made with just the driver's side recovery point.

That said, for those that want the most pulling options, or the most bumper protection as these, at least on FJ's, I've seen take a beating driving down rock ledges and save the bumper from getting hit, we have the option of 2 recovery points. And if for whatever reason the passenger side doesn't fit I'm sure we can work out a refund.
Click to expand...

patkelly4370 said:
As noted, I did cut my exhaust.
I've been wanting to anyway to avoid crushing the tip while offroading.
I didn't trim enough, it was still pointing straight back and did melt a small part of the rear plastic. Nothing that cant be trimmed to look decent. Also melted the white plastic between the bumper cover and frame. I intent to replace with a real metal bumper some day.
In the mean time, I did clamp a turndown/out to the exhaust pipe and that has prevented further melting of the plastic.

Sent from my SM-G955U using Tapatalk
Click to expand...

Not sure if the picture loaded but the holes on passenger side are about 1.5" above exhaust

Probably would require cutting of pipe right?

I do have a factor55 recovery point for the hitch but liked the idea of spreading weight n also side recovery if needed in certain situations would be easier

Definitely in for at least one, might get 2 based on the answer or if decided to cut pipe if needed down the line

Thanks again for all the help
 

Attachments

  • IMG_0289.jpg
    IMG_0289.jpg
    122.1 KB · Views: 317
scottiezilla said:
Not sure if the picture loaded but the holes on passenger side are about 1.5" above exhaust

Probably would require cutting of pipe right?

I do have a factor55 recovery point for the hitch but liked the idea of spreading weight n also side recovery if needed in certain situations would be easier

Definitely in for at least one, might get 2 based on the answer or if decided to cut pipe if needed down the line

Thanks again for all the help
Click to expand...

It will probably rub the exhaust, you could always order a single, mock it up to see if you like fitment, then order another if you decide you like the fitment and want both.
 
Inv4drZm said:
Also, they are about a month out.

I have a feeling we might be doing another batch shortly afterward due to the high interest, depending on if all you guys buy a set and if we have any more late joiners on this forum or the FJ forum.
Click to expand...

Any update on the latest batch? Sent my payment about a month ago.

thanks
 
Super job [MENTION=130999]Inv4drZm[/MENTION]. Received mine today and they are much beefier than I ever dreamed. These will work perfectly! Super pleased.

Excellent job on these!
 

Attachments

  • IMG_0041.jpg
    IMG_0041.jpg
    131.9 KB · Views: 416
I received the set Friday, painted them Saturday, installed on Sunday. I have to make a decision on the exhaust to make the passenger side usable.
 

Attachments

  • 20210502_114257.jpg
    20210502_114257.jpg
    113.4 KB · Views: 396
  • 20210502_114146.jpg
    20210502_114146.jpg
    90 KB · Views: 394
Been meaning to post this up but got mine in the mail about a week and a half ago. They look great and crazy beefy. Wouldn’t be surprised if the working load limit would be 10+ tons lol. That’s a very thick piece of metal to have to bend at a 90* angle, sheesh.

I’ll try to get them painted up and installed on my next days off. Thank you for a great product!
 
We're fresh out of recovery points for this batch, but we still have a number of people interested so we might do another sooner rather than later.

Thanks everybody! Reply below if you are interested in the next round.
 
I have a used set for sale, switched to a metal rear with integrated recovery points. PM me if interested. Does not come with new hardware. Located in OR but can ship.
 
Status
Not open for further replies.

Similar threads

mrbrenan
Beatty Metal Works Rear Winch Bumper for 5th Gen 4Runner
Replies
2
Views
1K
jdm-v35
J
mrbrenan
Toyo Steering Billet Tundra Steering Rack
Replies
1
Views
2K
gordonp
G
mrbrenan
Dissent Offroad High Clearance Rear Bumper Launch & Giveaway
Replies
3
Views
23K
Xtremluck
Xtremluck
B
Recovery Point on Rear Crossmember
Replies
10
Views
5K
Jakeepoo3
Jakeepoo3
2TH4IST
E-Fan swap.
2
Replies
32
Views
12K
kwerfybertface
K

Members online

Total: 3,072 (members: 2, guests: 3,070)

Forum statistics

Threads
278,317
Messages
3,554,129
Members
248,016
Latest member
Advally Service

Share this page

Trending content

Back
Top