Ryan04's Build Thread

Ryan04 said:
ya its complete bolt on that goes on the existing bolts. i also had to cut off the lower crossmember below the radiator. the one that has the tow hooks attached to. here are some of [MENTION=84322]Happysmiley[/MENTION]s pics when he built it
Click to expand...



Awesome bumper concept.
 
[MENTION=102068]Ryan04[/MENTION] - did you completely remove your fender liners?

I just installed the OME kit in my 2WD V8 2004 Sport and have some very slight rubbing at full-lock and I fear that there will be some more when compressed. I want to do the more common "relocation" of the liners, but they don't appear to look like what anyone else's liner and doesn't really relocate well. I was gonna trim up a bit but then I was thinking that these are a bit unnecessary here in AZ (or at a minimum, I can trim up the bottom 1/3 of the front portion and "snip the tip" of the bumper.
 
if [MENTION=84322]Happysmiley[/MENTION] decided to build some of these bumpers I am sure he would get a good amount of business....me included.

your Rig looks great!
 
chiahead52 said:
if [MENTION=84322]Happysmiley[/MENTION] decided to build some of these bumpers I am sure he would get a good amount of business....me included.

your Rig looks great!
Click to expand...

Agreed! I actually made a thread about his bumper to find who had made the original.
 
Third on that. No way I want to run a heavy ass bumper on my 2WD, but yours is perfect for a Pre-Runner. I definitely want one.
 
Amazing truck! Definitely looking to do something similar with my 2WD. 4WheelParts is having a sale on the same Procomps that you have. Before I pull the trigger, just wanted to see how you like them. Do you have wheel spacers, or is the wheel offset/bs responsible for that great stance?
 
TiN said:
Amazing truck! Definitely looking to do something similar with my 2WD. 4WheelParts is having a sale on the same Procomps that you have. Before I pull the trigger, just wanted to see how you like them. Do you have wheel spacers, or is the wheel offset/bs responsible for that great stance?
Click to expand...

Haha thanks! the wheels have been great so far. No complaints. The wheels have a little to do with the stance but up front my spindles push the wheels out about 1" per side. The procomp model that I'm running is 7032-7983
 
Ryan04 said:
Haha thanks! the wheels have been great so far. No complaints. The wheels have a little to do with the stance but up front my spindles push the wheels out about 1" per side. The procomp model that I'm running is 7032-7983
Click to expand...

Thanks man! Wasn't my first choice, but I couldn't pass up the deal when I saw how good they looked and how much cheaper they were than Methods.
 
You must log in or register to reply here.

Members online

Total: 160 (members: 1, guests: 159)

Forum statistics

Threads
278,306
Messages
3,554,045
Members
248,016
Latest member
Advally Service

Share this page

Trending content

Back
Top