Saker’s Midnight Build

[Cymon]

June 21, 2016
DDM TUNING SABER LED HIGH BEAMS 6000K

3000lm per side of LED Joy!
(see link for all photos)
http://www.toyota-4runner.org/2393282-post44.html

Holy Headlights Batman! I think I saw you testing them all of the way across the Gulf, at first I just assumed lightning.

Looks Great!

 

[Poche]

I have to say, I'm always on the look out for your awesome 4Runner every time I go to BR or even pass through on the way to NOLA. Definitely my favorite Build Thread to follow.

 

[Saker]

I have to say, I'm always on the look out for your awesome 4Runner every time I go to BR or even pass through on the way to NOLA. Definitely my favorite Build Thread to follow.

[MENTION=138210]Poche[/MENTION],

:thanks:

Appreciate the kind words!

 

[Poche]

Mais always for a fellow Cajun!

 

[Saker]

July 6, 2016
FJ CRUISER Grip Handle Install Mod
FJ CRUISER GRIP HANDLES install on a 2014 T4R

 

[CT_NGO]

Nice Ride

Awesome build bro.

 

[Doc_Fry]

April 15, 2016
Aux Electrical Circuit Mod


I decided I would try a project to have dedicated fused power all in one place via a Blue Sea 5025 6 Circuit w/ ground bus & Cooper Bussmann Resettable Circuit Breaker CB285-100, instead of individual leads running to the battery for power.

TEASER:
I have something in mind to keep it virtually water-resistant/waterproof. I’ll see if it works out.

***Will add photos as items arrive or get installed.

Below are the items I am connecting:

• 12V Circuit for Trailer Back-up Lights

• LED Light Bar

• Engine Compartment LED Light Mod



Seems like there is something else…. I’ll find out when I start unhooking connections!


Started fabricating my support bracket out of a piece of 3/16” plexiglass for the Aux Electrical Circuit Mod

Here is what I did. I got the bracket from Someone in Tacoma Forums. He laser cuts and presses them for whatever you need.

 

[Saker]

Sept 26, 2016
Aluminum Oil Filter Cap

Toyota Part # 15620-31060

 

[oljedi11950]

Still like the 6112s ? Thinking about doing them soon .:surfer:

 

[Saker]

Still like the 6112s ? Thinking about doing them soon .:surfer:

Yes, still like em'
You will benefit from the new ones by being able to make the lean go away by going to the next Circlip on the new gen 6112's.

 

[oljedi11950]

Yes, still like em'
You will benefit from the new ones by being able to make the lean go away by going to the next Circlip on the new gen 6112's.

So more settings than the 51s ? Go more than 2.5 also ? :doh:

 

[Saker]

So more settings than the 51s ? Go more than 2.5 also ? :doh:

There are 7 grooves instead of 5, spaced closer together.
Here is there document: http://cart.bilsteinus.com/pdfs/E4-WM5-Y506A00_1.pdf

 

[BobsTrail]

Sept 26, 2016
Aluminum Oil Filter Cap

Toyota Part # 15620-31060

Thanks for the post, now I have to get one of these for the next oil change.

 

[oljedi11950]

Thanks [MENTION=103267]Saker[/MENTION]

 

[Saker]

Sept 26, 2016
Aluminum Oil Filter Cap

Toyota Part # 15620-31060

Thanks for the post, now I have to get one of these for the next oil change.

Here is what I purchased after doing some research.
The filter removal tool is included and worth the extra you will pay IMHO!

Toyota Lexus Scion Special Oil Filter Wrench Large Tool + filter cap 15620-31060

 

[headpaneer]

Here is what I purchased after doing some research.
The filter removal tool is included and worth the extra you will pay IMHO!

Toyota Lexus Scion Special Oil Filter Wrench Large Tool + filter cap 15620-31060

That's pretty slick and I like that wrench. Are there known issues with standard filter cap?

 

[BobsTrail]

I have a filter wrench for the plastic housing, will it work with the aluminum housing or do I need to buy the new wrench too?

 

[Saker]

That's pretty slick and I like that wrench. Are there known issues with standard filter cap?

If you happen to drop the OEM, it may poroduce (<--OMG, what was that) produce a hairline crack that could show up at the most unforeseen time according to my Toyota Tech...other than that it's something I feel a lot better with. Maybe a feel good mod!

I have a filter wrench for the plastic housing, will it work with the aluminum housing or do I need to buy the new wrench too?

Should work.

 

[headpaneer]

If you happen to drop the OEM, it may poroduce a hairline crack that could show u at the most unforeseen time according to my Toyota Tech...other than that it's something I feel a lot better with. Maybe a feel good mod.

I can appreciate feel good mods! Thanks.

 

[Saker]

November 16, 2016
Air Lift 1000 Air Bags
Referenced http://www.toyota-4runner.org/5th-gen-t4rs/92013-antmans-thread.html and a couple other installs.
Used kit #60819 after calling them and giving the spring sizes.