Side Mirrors (14+)

Wiring Diagram:


F11 Connector:


In these diagrams, do "A17" and "A28" refer to the connectors that plugs into the OEM turn lights (for 2014+ 4Runners) in the mirror pics shown below?

dIVuCMA_joRdY54K0Yrj-MhQ63RdGnGKkXBovCxtSSTZCYqAMuZ9jp6NimJ3JAFzF9xBqBtIHcRC4ilFW4fqvOucf1mB6IEEoKui2JwZMdaqRYHPLiynr6qVcTbtIBgvtHfNOhQrhBo=w600-h315-p-k

F2wqUhaxV822zerD2R_rYZ_8GknFC6R494NvHkRTaioCoblIy_eyQjQpWMhEQH_SFTsFzZwAJh9LcO6SxepHq8U0j8XOso8YFRqlbxNCNFzhJR6KwNqRYLOlfSut5ZQ8Q_27izPpHHY=w600-h315-p-k


I am looking to source the connectors for the lights for a different project (trying to install these lights in a trim that doesn't have them but need those connectors to make the connection easier, rather than using spade connectors as 2.8mm is a bit tight when I tried). Thanks!
 
Last edited:
Hey guys--

I have 14+ aftermarket side mirrors on my 2011 TE. They are powered for mirror control, but they don't have the signals built into them.

Then, I found on Car Trim Home that they're making sequential replacement lights for those with the signals built into the mirrors. I dig the look and would like to pick them up, but my assumption is that I'd need the harness that runs through the door panel into the signal controls.

Any suggestions on how to achieve that or what harness I need to be looking for?
Was the 14+ mirror a direct bolt on to your 2011 TE?
 

Members online

No members online now.

Forum statistics

Threads
278,309
Messages
3,554,068
Members
248,016
Latest member
Advally Service

Trending content

Back
Top