Spark plug gaps

KidVermicious

New member
I read a thread on another forum about a guy doing some basic tuning of his Ford motor. A lot of what he was doing is similar to what we do - he increased his air in, bumped his timing, and then he increased the gap on his spark plugs by a couple hundredths.

He figured that with more air and earlier spark, he wanted bigger spark to go with that. I think he's off his rocker and that's not going to do any good unless he opens up his injectors and gets a bigger ignition coil, but as long as I'm under my hood, what do you guys think?
 
Register to hide this ad
I did a little research on this, and opening up the gap will help a little, but it also puts more strain on the other ignition components--the coil needs more voltage, the wires can fry due to increased resistance, and on down the line. There is a sweet spot for the gap, and anything beyond that does nothing to help. I did find one source that said the factory specs are typically too small for optimum burn, and you can increase .010 for better performance. So basically, a small amount can help, but too much not only doesn't help, it can lead to component failure throughout the ignition system.
 
I think the factory does this intentional. They want their engines to run a little rich to help the engine last a little longer and to avoid it running too lean.

If there was a gain from this, it would be very minimal... maybe a couple ponies and the gas mileage difference wouldn't even be noticeable.

I would suggest to leave it stock and reliable. If you want to modify it, do it right and get a MSD and use hotter plugs, not opening the gap on regular plugs.
 
Considering what these engines are being used for, ANY mods concerning spark plugs are a bit over the top--the tiny gains won't even be noticed in anything less than racing conditions. An MSD ignition module would be a better investment, which would give noticeable results for everyday use and trail running.
 

Members online

Forum statistics

Threads
278,307
Messages
3,554,055
Members
248,016
Latest member
Advally Service

Trending content

Back
Top