stupid question of the day...

[bNugs]

ok so i am going to be buying 7 wrap lc and tundra coils and at first was looking for struts for the 4 runner to go with them... then i realized those probably wont work. now my question is do i need to be looking for extended 4runner struts or stock options for each veh the coils are coming from ? Also i thought about getting the adj. bilstiens from toytech and the same question applies there. do i need the ones from the runner section or the ones from the tundra/ section since the bilstiens say for 3" of lift.

figured i would throw this question in here too, tundra coils, adj bilstiens and top out spacers will give me how much lift do you think? i know it wont be level w the 7 wraps since that is about 3.5 but can i get the front to 3 since i have read stock billys on tundra give about 2

 

[fightman80]

I can't speak to the Bilstein Adjustables....as I don't have those. However, the combo I do have come right out of a Tundra and installed into my truck. The only difference is, I used the 4Runner Top Plate. I simply disassembled the Tundra Strut Assemblies, and then installed my 4Runner Top plates, and when it came time to install the struts into the truck, I added the Toytec Top Plate Spacer. I don't have a stock ground to fender measurement, but my current ride height, is 38 1/8" from ground to fender.

Hope this helps.....and by the way: "The only stupid question, is one that is not asked."