Tail Lights LED Project
- Thread starter AlexJet
- Start date
jacal
New member
Done!!!
This mod is a breeze to do! 2 - 10mm nuts for each tail light, thru the interior access hatch. Follow the instructions from alex on the connectors and that is that!
On my 2003 LTD v6 there was nothing to do except plug and play! I had slightly different part numbers, but they were just fine.
Are the old lenses sellable on ebay or something?
J
This mod is a breeze to do! 2 - 10mm nuts for each tail light, thru the interior access hatch. Follow the instructions from alex on the connectors and that is that!
On my 2003 LTD v6 there was nothing to do except plug and play! I had slightly different part numbers, but they were just fine.
Are the old lenses sellable on ebay or something?
J
koolguys4runner
New member
is 06 4runner really uses led in tail light, because they look to bright, i was thinking that the are reflector (plastic) in the shape of leds
koolguys4runner
New member
i bought my 06 4runner in september and all my friends were impreesed with the tail lights, but i was thought they are just reflectors not actual leds. but thank you for clearing that for me.
Tucson T4R
New member
Well, I broke my right rear tail light lens last weekend on my 04. Seems like a logical time to upgrade to LED rears instead of spending $$ on the old style. :biggrin2:
Thanks to this thread, the upgrade will be a piece-o-cake. :bigok:
Thanks to this thread, the upgrade will be a piece-o-cake. :bigok:
:
Tucson T4R
New member
Mine are installed! :bigok:
At first I thought I had a problem with the electrical plugs not matching up. I freaked out and came back here and read the write up, thinking I got the wrong part number lights.
Then I pulled my head out
and realized I had to move the middle light socket over to the new lens housing and plug the new LED connector into where the old light bulb was. The plug on the old socket obviously fits back onto the wiring harness plug just fine.:biggrin2:
Big improvement even during the day. Thanks for the info.:awais:
At first I thought I had a problem with the electrical plugs not matching up. I freaked out and came back here and read the write up, thinking I got the wrong part number lights.
Then I pulled my head out
and realized I had to move the middle light socket over to the new lens housing and plug the new LED connector into where the old light bulb was. The plug on the old socket obviously fits back onto the wiring harness plug just fine.:biggrin2: Big improvement even during the day. Thanks for the info.:awais:
djchris713
New member
Re: Finally done and on truck
AlexJet said:
djchris713
New member
Re: Re: Re: Finally done and on truck
did they install it for you?
AlexJet said:
did they install it for you?
cdoyle
Member
MikesToy said:
Not sure if this helps, but take a look at my thread where I converted them to LEDs.
http://www.toyota-4runner.org/showthread.php?s=&threadid=15651
00328
Senior Member
cdoyle, your bumper lights turned out sweet, I remember seeing your post quite some time ago.
I just removed the lenses and dremelled the hole out in the back and installed some sockets with led bulbs. Turned out very nice as well, and I think was a lot easier.
There is a very extensive thread around here that goes for pages and pages and a couple of the pages give very detailed instructions.
I just removed the lenses and dremelled the hole out in the back and installed some sockets with led bulbs. Turned out very nice as well, and I think was a lot easier.
There is a very extensive thread around here that goes for pages and pages and a couple of the pages give very detailed instructions.
