Tailpipe Mod Complete! (4th gen)

CJ3Flyr

CJ3Flyr

Super Moderator
I want to thank RPC for finally lighting the fire...http://www.toyota-4runner.org/4th-gen-t4rs/66116-what-difference.html I know a few others have done it a long time ago too. They got me thinking about it and RPC's install nudged me over-the-edge:)



I did the tailpipe mod! I love it and the only regret I have is I didn't do this the day I took delivery of the T4R.

Noise: Almost no difference. The only time I hear any difference is a tiny bit more growl just off of idle when accelerating from a dead stop. Once under way there's NO difference.
Performance: Better mpg:D How you ask? My new tailpipe weighs less than OE pipe and resonator:lmao:
Smell: All but gone... The only way I could catch even a whiff of exhaust is to floor it from 40-65mph with the back window all the way down, the sunroof open 4inches and all the other windows up. Anyone who's tried this configuration knows it's a worst-case scenario. If the back window is up even half-way no smell!

Awesome $65 mod!

IMG_0547.jpg
IMG_0548.jpg~original



IMG_0549.jpg
IMG_0546.jpg~original


IMG00209-20100520-0958.jpg~original
 
Last edited:
Register to hide this ad
If you started this mod, it will become epidemic like your FJC springs :) J/K

Q:
1. Is the resonator really heavy? it could be a very effective mod when removing unwanted weight in the 4Runner.

2. If it is, will it not affect the weight distribution in the 4Runner considering the gas tank and the battery is in the left side?

Thanks!
 
borgzman said:
If you started this mod, it will become epidemic like your FJC springs :) J/K

Q:
1. Is the resonator really heavy? it could be a very effective mod when removing unwanted weight in the 4Runner.

2. If it is, will it not affect the weight distribution in the 4Runner considering the gas tank and the battery is in the left side?

Thanks!
Click to expand...
No the resonator is not heavy at all, would not affect the weight balance. The muffler and the resonator might affect the weight distribution but not enough to notice.
 
Autbond said:
No the resonator is not heavy at all, would not affect the weight balance. The muffler and the resonator might affect the weight distribution but not enough to notice.
Click to expand...


I was kinda joking:D The difference weight is negligible, 5-6lbs difference, tops.
 
Last edited:
Funny how I was just thinking about this today. I'm just itching to cut the resonator off and turn this pipe to somewhere else!
 
Very nice Chris!

Jig sawing off my resonator was the best performance mod I've done. My mom has a SS/T Dodge with the upgraded exhaust. My 4Runner sounds exactly like her truck. Especially when I floor it. She roars!
 
I just hacked off my resonator the other day because my gibson muffler came in! I'm itching to get it all done but I've decided I should probably fix my a/c first, then I'll do the exhaust and then the FJ suspension that's sitting in my storage.

Great pics! I'm definitely taking them to the shop with me.

I can verify the slight drone when accelerating but other than that, no difference.

You have influenced yet another one of my mods, thanks Chris!
 
This has been on my mod list for a while, I just can't find a decent exhaust shop (locally) to do the work. I'm really considering just hacking it off and using a turn down tip to have it dumped right after the axle, not sure if that'd work/be safe though.
 
See, told ya' it was $60 well spent!

Looks great, I like the profile of the tip too.
 
Did you do the welding yourself? If the tailpip assembly comes off easy I have an 80 amp welder I could use...I've bn wanting to do the same thing, but would like to upgrade for better airflow, just don't want the louder noise along w/ most aftermarket pipes. Good pics, if I can pull the whole tailpipe to get my welder around I'll be doing the same thing soon!
 
ARK_SWAMP_RIDER said:
This has been on my mod list for a while, I just can't find a decent exhaust shop (locally) to do the work. I'm really considering just hacking it off and using a turn down tip to have it dumped right after the axle, not sure if that'd work/be safe though.
Click to expand...

Granted I'm putting in a gibson can as well but I was getting quotes this week and heres what I got:
Meineke: about 2 hours for both the tailpipe reroute and gibson install, labor rate of $97/hr -> $184
Local shop: anywhere from 1 to 3 hours so $80-240
Custom Exhaust Shop: $80-100 for it all. Needless to say, I'm gonna go there. I'm trying everything I can not to go do it today, I really should use the money for other things right now...

So, for now, I just have the resonator hacked off for sound test. I forget where but in another thread about this someone said they hacked it off and left it right next to the tire under the truck for a few years without problems. They also did it with their previous t4r and never had problems so I'm not too worried about it just hanging for now.
 
Looks Great!!

I would love to do this mod. Does anybody know if it would void any warranty? I have the extended 100,000 miles warranty and only have about 35,000 on it now so I don't want to go messing around with anything that the stealership can blame me for.
 
Ruffian said:
Very nice Chris!

Jig sawing off my resonator was the best performance mod I've done. My mom has a SS/T Dodge with the upgraded exhaust. My 4Runner sounds exactly like her truck. Especially when I floor it. She roars!
Click to expand...

I'll bet it's pretty sweet w/ a V8. The resonator made virtually no difference in noise with the V6 (which is a good thing on a 'trucky' V6:D )

RPC said:
See, told ya' it was $60 well spent!

Looks great, I like the profile of the tip too.
Click to expand...

You weren't kidding:bigok: I like the cut on the tip. Tim, a long time buddy with a small shop, and I worked that. That was the most time consuming portion of the job. I am very satisfied but still considering a tip. I'm not big on bling but the right tip can look good IMHO.

12guns said:
Did you do the welding yourself? If the tailpip assembly comes off easy I have an 80 amp welder I could use...I've bn wanting to do the same thing, but would like to upgrade for better airflow, just don't want the louder noise along w/ most aftermarket pipes. Good pics, if I can pull the whole tailpipe to get my welder around I'll be doing the same thing soon!
Click to expand...

We sawzalled the pipe. I told him if I didn't like it I may want the OE resonator/pipe back in. The saw provided the cleanest, most salvageable way to remove the pipe.

matthewy03 said:
Looks Great!!

I would love to do this mod. Does anybody know if it would void any warranty? I have the extended 100,000 miles warranty and only have about 35,000 on it now so I don't want to go messing around with anything that the stealership can blame me for.
Click to expand...

It absolutely should not. There is law and precedent on your side. Any mods from the cats back are usually not questioned (unless a crappy job rubs through something etc).

andyman32392 said:
IMO I think you should put a tip on the end of it.
Click to expand...

I'm working on it... I don't know how long it'll take me but I'm sure I'll get one:D





Another big plus is items on the right side of my hitch-haul won't get burnt/hot anymore:bigok:
:cheers:
 
Last edited:
kinda looks like mines.
<object width="480" height="385"><param name="movie" value="http://www.youtube.com/v/XNtfNHzXFHc&hl=en_US&fs=1&"></param><param name="allowFullScreen" value="true"></param><param name="allowscriptaccess" value="always"></param><embed src="http://www.youtube.com/v/XNtfNHzXFHc&hl=en_US&fs=1&" type="application/x-shockwave-flash" allowscriptaccess="always" allowfullscreen="true" width="480" height="385"></embed></object>
 
Rice--- What is the diameter of your tailpipe? It looks much bigger than CJ's.

CJ--- Why didn't you go with bigger diameter pipe? Your tailpipe reminds me fo the puny tailpipes that were on the prior generation Xterra!
 
You must log in or register to reply here.

Members online

Total: 243 (members: 1, guests: 242)

Forum statistics

Threads
278,306
Messages
3,554,045
Members
248,016
Latest member
Advally Service

Share this page

Trending content

Back
Top