Just wanted to let 2nd Gen Magnuson users my results of an oil change I did prematurely (according to Magnuson).
I purchased new from URD and installed my supercharger back in 2019 and have since put almost 45,000 miles on her. She has always been a little noisy, especially at idle, but was getting really noisy, especially after a prolonged road trip. So noisy that at first I was looking at other potential problems from the 4Runner (like a pulley or alternator bearing). After I eliminated those things I decided to do an oil change on the supercharger. I purchased two 4oz AC Delco synthetic supercharger oils and syringe, both off Amazon (links below). I was able to remove 4oz's from the supercharger while still mounted. I was really happy to get that amount out as it should only have approx 4.05oz's. The 4.05oz amount I got from watching Timmy the Toolman on YouTube (and Shawn of course) rebuild the snout on a 2nd Gen SC.
The oil that came out was a dark golden brown and smelled somewhat rank. I used the same syringe and put back in a little over 4oz of the AC Delco supercharger oil and man, what a difference it made! I can barely here the supercharger now at idle. I think it's quieter than when I first installed it 5 years ago!! There is no way the supercharger would have made it 100,000 miles without some kind of failure. Anyway, wanted to pass this along as it is definitely not a difficult job. I plan on making it a yearly maintenance item.
Amazon.com
Amazon.com