The next mod should be?

[Alabamaguy]

Aussie Locker?

 

[The97Runner]

yea josh.bunch i just think if i dont the wheels black the bumpers would need to be blacked out too. Ill keep these like they are till i get ready to buy aftermarket ones. I like the fuel and xd wheels. And im only wantin to spend like 300 bucks for the next mod

 

[josh.bunch]

If you want to spend $300 I would go with 4xinnovation sliders. 4x Innovations: 90-12 4 Runner Rock Sliders

Hepar, Brian2sun, and some others have them. I've got them too just not installed yet. The deckplate/ISR mod is a must do too since it cost less than $20.

 

[The97Runner]

If you want to spend $300 I would go with 4xinnovation sliders. 4x Innovations: 90-12 4 Runner Rock Sliders

Hepar, Brian2sun, and some others have them. I've got them too just not installed yet. The deckplate/ISR mod is a must do too since it cost less than $20.

I was thinking about the trail gear or addictedoffroad sliders. Whats ISR stand for imma newbie

 

[Alabamaguy]

Intake Silencer Removal.

Seriously though if you do some offroading, a lunchbox locker is right in your price range.

 

[The97Runner]

Intake Silencer Removal.

Seriously though if you do some offroading, a lunchbox locker is right in your price range.

Im assuming thats what people replace with the airaid piece and i stay on the concrete for the most part

 

[Alabamaguy]

Im assuming thats what people replace with the airaid piece and i stay on the concrete for the most part

Yeah, there's a couple write-ups on how to replace it with PVC too. There's also a knock off intake on Ebay that's a carbon copy of the AEM (iirc) that has gotten good reviews.

 

[josh.bunch]

I was thinking about the trail gear or addictedoffroad sliders. Whats ISR stand for imma newbie

Intake Silencer Removal Mod - 3rd Gen 4Runner (2000) - YotaTech Forums

I went to a Midas by my house and told them what I was doing, and what I needed as far as the diameter and length of the tube. He went in the back, cut it a few inches longer than I asked just in case, and said it was on the house.

Hepar sent me the T fitting and some extra tube as no cost, so that was a free mod for me! (I had extra tubing left over that I gave to Rc4r and used it on his K&N cold air intake install).

 

[The97Runner]

Intake Silencer Removal Mod - 3rd Gen 4Runner (2000) - YotaTech Forums

I went to a Midas by my house and told them what I was doing, and what I needed as far as the diameter and length of the tube. He went in the back, cut it a few inches longer than I asked just in case, and said it was on the house.

Hepar sent me the T fitting and some extra tube as no cost, so that was a free mod for me! (I had extra tubing left over that I gave to Rc4r and used it on his K&N cold air intake install).

Well i will def use the yotatec thread cause to me it seems kinda confusing as far as i know i need a pipe and a T fitting