Toytec Boss Owners Question [how many threads showing?]

[J Hoss]

Those of you running these coilovers, if the height of your truck is LEVEL, how many threads are showing beneath the bottom collar[adjustment] on the front coils?

At full lock I'm still having some rubbing issues on my bumper (inside the fender) & body mount after 285s and an alignment, and hoping to save myself a few tire removals by starting at a tested height.

Still has a little front rake to it but intend to fix that asap. I shall pay the forum Gods back in Big Bend pictures from this weekend :grouphug:

 

[Lenny33]

I count 17 threads showing with stock bumper and no winch. This was, however, slightly high compared to the back and I ended up putting the smallest plastic spacer from Toytec in the rear, to level.

 

[mace.]

What wheels are you running ?

 

[alexb]

I counted 17 threads on the passenger side and 21 threads on the driver side. I raised the driver side up about 1/4" after about 5k miles of settling to get rid of rubbing on the driver mud flap. Even now it has settled to about 1/8" lower than the passenger. Passenger is about 39 3/8th" from ground to fender and driver is about 39 1/8" from ground to fender. I've noticed i'm getting some light rub on the driver mud flap again in certain situations.

 

[Greedy]

I have 16 showing on the passenger, and 15 on the drivers. Slight rubbing on mudflap when turning and going down into a dip. Also running 285's, 8.5 wide wheels, and 4 degrees caster.

 

[Lenny33]

Funny enough, I didn't even think of measuring the other side! 17 was for my passenger side, which was closest to the front door of my house.

 

[J Hoss]

What wheels are you running ?

Konig CounterSteer type X.