Don't you have 305s already? I shot you a pm also.
Last edited:
Toytec now selling 1" body lift for 5th gens
- Thread starter DeepSea
- Start date
Don't you have 305s already? I shot you a pm also.
DeepSea
New member
Yes, but 305s are 33" tall not 35"
Last edited:
Oh I just meant why the 285/75 Nittos? You don't like the 305s?
Also sorry to bother you again, but what did you mean by raising the aluminum bumper 1 inch with the 8 bolts? I have to try to explain to my install guy...
Sent from my SM-G935V using Tapatalk
Last edited:
wfo9
New member
The front aluminum bumper (not the cover) has crush cans mounted on it. Those cans secure to the frame horns via 12 bolts (6 on each side of the truck). He means you move the cans (and bumper) up one notch and lose 4 bolt holes...
Last edited:
wfo9
New member
Glad you understood, I had some typos that I fixed LOL....
DeepSea
New member
I like the height and width but not the E rate because they're a bit stiffer than my previous tire, 285/70 KM2 which were D rated. Also they dropped my MPG 1-2. I like the Ridge Grappler because the size and it's C rated. You can definitely feel the difference when they're aired up and I usually keep mine about 35psi.
Miguelon
New member
I need to read up on what his issues were. I just finished my Toytec 1 in body lift and I already had an ICON stage 7. I see no issues so far.
Where da pics at?
FlightMedic303
New member
How was the install? Did you do it yourself or have it done? I bought mine a couple of months ago but no shop will touch it... I would like to do it myself just don't know if I have the proper tools.
Miguelon
New member
It was very easy and straight forward.. All you need is socket set and a floor jack. I'm going to do a write up on my build thread. Pics coming sokn
FlightMedic303
New member
Awesome! I have all of those tools haha... I will keep my eyes peeled for the write up! If it's not too much to ask, could you please post a link to it here in this thread when it's ready?
96706RROMJP
New member
Soooo perfect looking.
Looks great!
Did you run into any problems? Any feedback/suggestions/etc for those of us who are curious?
96706RROMJP
New member
Nope No Problems , im running NFAB steps and if you look close to my pic, Gap between the rocker panel and NFABs look normal as when i didnt have the bodylift, The Install was done by one of Hawaiis Top Lift shop (Maui Offroad) they did a very good job and it took about 4 hours.Ride still feels awesome!
jbrockiii
New member
Was looking at the Toytec spacers. Do you really need shocks or can you just install the spacers?? Local shop says spacers only are just fine- I'm not looking for serious off-roading- just occasional. Really just want the truck to look better (and be able to jump bigger curbs when necessary:thumb:- without scrapping the limited front bumper).
96706RROMJP
New member
Its really what your needs are and what your going to be using your rig for, im not really a spacer guy thats why i went with Bilstein Shocks along with Toytec Coils all around. But its preety much on you ,on how you want your set up.
Similar threads
