Trail Blazing Once Again in Colorado...Any Takers?

Change me to a no go. I got some front end damage Friday morning. Do far I cant figure out all that is wrong so I doubt I will have it fixed by Saturday.

I wish I could say the damage was trail related but it was not.
 
Change me to a no go. I got some front end damage Friday morning. Do far I cant figure out all that is wrong so I doubt I will have it fixed by Saturday.

I wish I could say the damage was trail related but it was not.

yeah, us in Colorado know what probably caused that...

snowmaggedon? I havent seen this much snow since 2004 or 2005 at least

oh, and theres no way Ill be ready, the Ring and Pinion gears I bought for my front diff were shot, so I have to get new ones, means Ill be pulling my rear 3rd member on monday and hopefully in a few weeks I can put everything back together...
 
Thanks guys for the heads up that you are not going. I hope to see you next month on another trip we might plan

Page one has updates
 
Last edited:
"(Coming from Denver) Meet in Bailey on Highway 285 at the Loaf N Jug station at 0840. Then drive 1hr 20min to trail."

If we are to be at the trailhead at 10:00, then we should meet at the Loaf N Jug at 8:15-8:30, rolling out no later than 8:40. Agreed?

Those with CBs, how about channel 3 ?
I'll have mine on from my house so if you see me on the road, give me a shout.

Caution: The road from Jefferson to the trailhead usually has patchy ice in the shaded areas.
 
Last edited:
Ok Magert54 put me down as a yes, also Cody ( red Rubicon ) is also a yes
I hope to have my cb hooked up by then also
just need to figure out where to put the antenna's
 
I guess no CB for me, Ill be sure to update the roster for you "crashman". "gerdo" ill be putting that info up as well.
 
Guys, unfortunately I can't make this run. My wife and I will be celebrating our first anniversary on Saturday. So it goes without saying...

However, I will be making a run to Lefthand Canyon on Sunday if anyone is available. Make sure to take lots of pictures!
 
I replied in another thread that I was going to make this, but I'm still listed as a maybe in this thread. Just wanted to confirm that I will be there and meeting with the Bailey Group.

See you guys there!
 
I'm about a 97% YES right now!!

I just finished doing a 5-tire rotation and lubing my drive-line. I'm not a fan of the cold, but I've decided that I can't let that stop me from hangin' out with my T4R.ORG family!

I'll be meeting the group in Teller.
 
OK guys. Give me 20 min and the updates on all threads will be made. check the first page of all threads for most updated information.

Thanks ahead of time
 
Do we need totalk about who is bringing what for food or do we just want to all show up with grub? I will bring two bundles of firewood.
 
Update made to first page, only 2 days left. Remember, if your going to be late PM me with your number so we can stay in contact until you arrive.



Food:

Magert54- 2 packs of brats, tin foil and 1 or 2 poker things for the brats.
Footofgod- Firewood (2) bundles
 
It doesn't look like I'll be able to make it. My job is very busy this time of year and I'm going to have to work on Saturday. If something changes I'll let you guys know, but I don't see that happening.

Have fun, maybe next time!
 
Well, I am completely bummed now!! My wife and I will not be able to make it to the run tomorrow. I am really sorry about bowing out so late, but with all of the problems right now, we will have to wait until the next run. I hope everyone is safe, and has a blast tomorrow.
Peace!
 
I'll bring buns, mus****, and some cookies or something like that.

Weird... the forum doesn't like that word! It's the yellow stuff that goes on brats!
 
I'm super bummed. I couldn't get my rig put back together in time. I was prepared to work all night and then drive straight to the meeting place if needed but I'm stuck without a press.

I have a couple of bad bushings in my driver's side lower A arms. I started on them on Weds to leave me plenty of time to get them swapped out but man those things have been a real PITA. I ended up building a couple of tools to help pull the cam tubes out but it's taken the better part of two days to remove them.

Success tonight at around 1:30am to get the tubes pounded out but didn't have a way to press out and in the new bushings. I tried my Dake press but it wasn't enough grunt and also I didn't have the right cups for the bushings. I also tried brute force with a hammer and not surprising that didn't work.

So enjoy the fresh snow, the good company, and the wheeling without me :cry2:

The current state of my rig. Lame.
2012-02-11020105.jpg~original
 

Members online

No members online now.

Forum statistics

Threads
278,317
Messages
3,554,129
Members
248,016
Latest member
Advally Service

Trending content

Back
Top