Ugh!!!!!!

[jdandrson]

Please help. ABS, VSC TRAC and VSC OFF lights are on after a right front wheel bearing replacement. I have read the other post about zero point calibration and using a OBDII but neither have worked. When I do the zero point calibration with the jumper wire the VSC OFF light will go out and the ABS will flash. The VSC TRAC remains on and that's the closest I get to clearing it. 2004 Yota 4runner SR5, 6 cylinder. It's my wife's and she is sweating the hell outta me over these lights.

 

[cali_axela]

Did you ensure that the ABS wiring harness for that wheel was reconnected properly after the service?

 

[jdandrson]

Yea checked it several times.

 

[grimpy]

I had a similar issue... Disconnected the battery post overnight and plugged it back in the morning and the lights were gone.

 

[jdandrson]

Neg or Pos side Grimp

 

[CJ3Flyr]

Neg or Pos side Grimp

Doesn't matter. When working on the + don't let the wrench touch anything on the vehicle/battery bracket...

 

[Jeff T]

Doesn't matter. When working on the + don't let the wrench touch anything on the vehicle/battery bracket...

What, you don't like sparks!? :lol:

 

[grimpy]

as mentioned... doesn't matter which side... I usually just pull the ground.